floroboardsaw ,jig saw or circular saw

[tuckermot]

Hi all
at the moment i use a hand floorboard saw to cut floorboards .due to the time factor and the loss of skin on my hands i am considering using power tools. can any tell me if they use jig saws or circular saws to do this job and why and what deth to set blade on cicular saw, and the pro and cons of all 3 tools

richard

 

[Kiers1970]

I use bosch 18v circ saw and bosch 10.8 mutitool thingy, . circ saw is adjustable to any depth, anf the blade is superb, dont worry if you catch a nail.

 

[martysparky]

A and maybe C the jig will cut too deep and hit.... and wont cross the joists.

 

[tuckermot]

Hi kiers
whats the best way to go about using a circular saw on floorbooards i am so worried about pipes ect under the boards can you go through the steps one by one mate on how you do it

 

[robskiing]

For me a circular saw is a must one tool i couldnt do without when i get started on a job and i need a few floorboards lifting i just lift a trap and set the blade to a couple of mm before it cuts completely through this avoids hitting unseen pipes underneath . Would never a jigsaw as you have no control on the depth.

 

[spamwize2]

if the property is occupied like a job i done few weeks ago (bedroom, clothes everywhere, bedding everywhere!) i used a floorboard saw to keep the dust at a min, i dont want to pay there cleaning bills! took a lot longer but hey no mess

 

[Kiers1970]

spot on what rob said, find the depth of board form lifting one from the trap, cut the tongue, cout across the board, seconds flat, really neat, all done, the bosch gear has served me so well the 18 v stuff, need new batts now. got it all even the superb site radio charger, great investment

 

[tuckermot]

so just set the saw to about 2mm before it cuts through the tounge and grove to avoide cutting through pipes under neath is that correct

Richard

 

[robskiing]

Yes mate 2mm is fine you will still be able to cut the tongue on the board both sides then cut on the joist if you buy the best saw blade you can afford ie prefebly carbide tipped you can hit one or two nails without too much damage then just lift the board it will break quite easily .

 

[Phil]

i use the circular dewalt works well

 

[tuckermot]

circular saw it is then

 

[lewlec]

hi

metabo circular saw is great also a fein multimaster is a must for me really.

regards
gary

 

[Deleted member 9648]

Dont even think about a jigsaw.....been there,done that.....got very wet.

 

[Guest123]

Dewalt 18V circ saw....jobs a good un.

 

[DurhamSparky]

what about one of them JML exact saws with the predifined cutting depth...!! walked past one in macro other day and thought that could be handy !!! never bought it like...!