Evening all,
I have built a 2 DOF VR Roller Coaster simulator.
I am now adding additional realism, specifically wind.
This is the specification of the inline air pump that I am going to use,
Inline Blower | 270 CFM 4″ In-Line Bilge Blower Fan - http://www.seaflo.com/en-us/product/detail/663.html
Model
SFIB1-270-02
Voltage
12V DC
Air Flow (cfm/cmh)
270/456
Max Draw (A)
6.0A
Fuse (A)
10.0A
I need to source a 240v (i.e plug in uk socket) device that will power this, I do not need a battery that stores, but one that runs off mains and isn't to bulky.
I have no real idea where to start, I am also concerned with how to wire it up as I will need a quick release system as the unit is transported all the time from event to event.
I may add further blowers moving forward so something that can handle more than 1 would be great! Or multiple outputs for different things moving forward.
Thanks for any help!
I have built a 2 DOF VR Roller Coaster simulator.
I am now adding additional realism, specifically wind.
This is the specification of the inline air pump that I am going to use,
Inline Blower | 270 CFM 4″ In-Line Bilge Blower Fan - http://www.seaflo.com/en-us/product/detail/663.html
Model
SFIB1-270-02
Voltage
12V DC
Air Flow (cfm/cmh)
270/456
Max Draw (A)
6.0A
Fuse (A)
10.0A
I need to source a 240v (i.e plug in uk socket) device that will power this, I do not need a battery that stores, but one that runs off mains and isn't to bulky.
I have no real idea where to start, I am also concerned with how to wire it up as I will need a quick release system as the unit is transported all the time from event to event.
I may add further blowers moving forward so something that can handle more than 1 would be great! Or multiple outputs for different things moving forward.
Thanks for any help!