E
EMSpark
An elderly couple have asked me to look into why their immersion heater isn't heating the water.
I have disconnected the element and, using an ohmeter, am getting the following readings:
Anywhere from 700 ohms to 60K ohms L-N
70 ohms N-E
500 ohms and climbing L-E
I suspect the element is knackered and needs replacing, but before I get Mr Plumber involved I'd appreciate your thoughts.
Thank you in advance.
I have disconnected the element and, using an ohmeter, am getting the following readings:
Anywhere from 700 ohms to 60K ohms L-N
70 ohms N-E
500 ohms and climbing L-E
I suspect the element is knackered and needs replacing, but before I get Mr Plumber involved I'd appreciate your thoughts.
Thank you in advance.