Meter Tails in Galvanised Trunking...Is that a thing?

Discuss Meter Tails in Galvanised Trunking...Is that a thing? in the UK Electrical Forum area at ElectriciansForums.net

The DNO will give you a maximum length for tails. (usually 3m). You described the best way earlier which is to run them into a fused iso and then run off SWA it singles if protected correctly. Neither need RCD protection so won’t be a problem.
 
New posts

Reply to Meter Tails in Galvanised Trunking...Is that a thing? in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

J
UK Meter tail extension…
Hi all, Customer has an extension and this compromises existing meter position, DNO is extending incomer and putting meter box on a different...
Replies
3
Views
388
JB1984
J
A
Meter installer won't work on my supply
Hi all -- full disclosure I am a 'DIY-er' but wanted to post here for greater visibility seeing as I certainly won't be doing this work myself...
2
Replies
21
Views
4K
Timbo
Timbo
Raptor0014
Solar and splitting tails
Evening all. I have a question as I can’t get my head around something with solar PV I’m going to be working on a new build in a couple of...
Replies
9
Views
2K
Gavin John Hyde
Gavin John Hyde
J
Sub Main Connection From Meter Box
Hello All, new to the forum. Would be grateful for advice on whether the following proposal is an acceptable solution or open to any suggestions...
Replies
9
Views
5K
davesparks
davesparks
K
Mix of 16mm and 25mm Meter Tails
Hi, Just had a new Smart Meter fitted yesterday along with isolator. The chaps installing the SMART meter used 16mm tails from the main DNO fuse...
Replies
16
Views
8K
SHFW74
S

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock