metrel mi 3100 mft need a new one

[jon jordan]

hi guys my fluke as passed away and i have been working with a metrel mi 3100 mft.

have you any idea of the best place to get one looked on internet but they seem expensive.

c.e.f aroung £480
test4less £460
testing co. in leeds £436 all plus vat is there anywhere else i should be trying to gain a better price.

cheers jon

 

[Phil]

HERE

try these guys £379 plus vat but then you get the 5% discount for being a forum member

 

[Sparkypablo]

Hi phil7677 just wondering how you get the 5% discount for being a forum member
cheers
Sparky

 

[Phil]

Hi phil7677 just wondering how you get the 5% discount for being a forum member
cheers
Sparky

hi mate it used to say on the front page but it seems to have gone. if you pm Test Meter

they are great guys to deal with mate. btw you may have to make 1 more post before you can pm so just repley to this thread

 

[Sparkypablo]

Cheers phil for the quick response will check it out
regards
Paul

 

[liam b]

I got a brand new one from a company on ebay for £280. Still in the packaging.

 

[ste kwok]

What is the difference between mi3100 and mi3000?Is the mi 3100 worth buying?Can you switch off the ze tables off.Need to replace my dilog tester,would you buy the mi3100

 

[Former Sponsor TM]

Hi ste kwok, the two main differences are that the MI3100 comes with the fuse breaking characteristics from BS7671:2008 downloaded into the firmware of the meter, which means that when you conduct a Zs test, the meter will basically give you a 'tick' or 'cross' indication as to whether the loop test has passed or failed. It's not a function that can be turned off.

The other main difference, and a lot of electricians find this useful, is the fact that the MI3100 comes with a tip commander probe. This is basically a probe with a button built in that makes it a lot easier to conduct tests, especially if you're trying to conduct a test on a ceiling rose, for example.

 

[ste kwok]

Thank you.does the meter still give you a reading for z s ?

 

[Former Sponsor TM]

Hi ste kwok, not a problem. Yes, the tester will give you an earth loop impedance reading in ohms.

If you want to go ahead and place an order, make sure you click the link to our website on the right hand side of the forum so that you obtain your 5% discount! >>>>>>>>

Cheers