G
GaryM
And if it's enquiry they'll probably quote 0.35 or 0.8 ohms!
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
- Thread starter Ashley Williams
- Start date
Discuss Prospective Fault Current in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net
Reply to Prospective Fault Current in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net
Similar Threads
So I’m doing my level 3 design project at the moment, and I’m on the question where you do all the calculations on each circuit, I’ve taken the...
Firstly, please go easy as I'm still a trainee! Working on my L3 2365
I'm having trouble understanding the rationale behind adiabatics...
Hi guys
Completed an EICR yesterday. One of the Sockets Radials had no CPC so R1+R2 plus Zs could not be not be completed. Does anyone know the...
Hi All,
I'm new to Amtech/Trimble and I've been asked to review a model.
I'm looking at circuits that are SWA cables using the armour and an...
Confused as to what the earth fault loop is. I'm aware it's the path that fault current takes (Line-Earth) but how many times does fault current...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Does a SPD need a dedicated MCB?Some contain an RCD which are not mechanical they are PCB based and hence do not comply to BS7671.- Latest: westward10
-
Eicr standardsFor the OP in case they have not come across them so far, the free BPG can be found here...
- Latest: pc1966
-
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.