OP
sappaazz
u better try the VSD or the two speed fan as advised by bomjac than to continue trying to split the star delta....
Discuss remote switching between star and delta (both ways) in the Commercial Electrical Advice area at ElectriciansForums.net
Reply to remote switching between star and delta (both ways) in the Commercial Electrical Advice area at ElectriciansForums.net
Similar Threads
Hi Guys,
We have a CNC router which uses single phase for the spindle, stepper motors and control box. This is all wired in and working...
Heeelp!
I have an 11kW/21A motor which is attached to a hydraulic power pack.
I have replaced the old panels with new, using the same star delta...
- Sticky
Ferrets are known for being small, resourceful, and incredibly clever. They can solve many problems by fitting into tight spaces and doing jobs us...
Hello Dear friends,
I am going to check a start delta starter for a motor(400KW) which is used for crane and lately it has been causing some...
Hi
I got called out to a faulty star delta starter on an old Stenner band saw Monday (was getting stuck in star and blow fuses) - So I ordered a...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.