Socket/Switches Swap Pricing Help

[richo106]

Hi,

Just on abit of advice on how you guys would price up a job that just involves changing socket/switches fronts from white to antique brass.

The client has supplied all the materials and ive checked that there are cpc's present at the switches.

There are 38 points to swap in total would you guys quote a price per point? and if you did what would you charge?

All help greatly appreciated thanks

 

[richo106]

Thank you for all your replies,

If in another case there were no CPC's at the switches and the client wanted metal switch plates... what are the options? as obviously running in a CPC to each switch will be a big/messy job.

Thanks

 

[Rpa07]

He must have pressed the 'ignore' button - vortigern was explaining about blocking yesterday and it seemed that you get all other posts except the person blocked - must be quite off putting and disjointed!

 

[Rpa07]

What, none of them ?

He must have pressed the 'ignore' button - vortigern was explaining about blocking yesterday and it seemed that you get all other posts except the person blocked - must be quite off putting and disjointed!

 

[Rpa07]

Chrome covered plastic or Hager, click white fittings as per the other thread going at the moment.

Thank you for all your replies,

If in another case there were no CPC's at the switches and the client wanted metal switch plates... what are the options? as obviously running in a CPC to each switch will be a big/messy job.

Thanks

 

[Spoon]

Right, I think, there is obviously a glitch somewhere cus I cant see a post by Murdoch in this thread.

What do you see for posts #8, #9, #11 & #15?
As above, see if you have not ignored him by accident.

 

[Pete999]

What do you see for posts #8, #9, #11 & #15?
As above, see if you have not ignored him by accident.

Right I had better check sorry for any confusion Spoon, all better now, don't know how that happened but the ignore button had been activated.

 

[Spoon]

Right I had better check sorry for any confusion Spoon

No need to apologise mate. These things happen...

 

[Midwest]

Crisps, I was getting right confused and in a panic, thought I was having to go back to all those metal cooker switches and earth with 6mm.

Pete, perhaps the posts were Echolalia'd!