DRM
-
Hello, my mate’s asked me to look at his spotlights in the kitchen because they were temperamental for a few months going off for hours at a time then coming back on and now they just trip the MCB as soon as switched on. They’re 12v spots.
They were on a dimmer switch so I changed that first to a standard switch but it still trips.
I assumed it was a transformer issue so I pulled a couple lights out until I found it and disconnected the mains from it keeping the live and neutral separated and then tried the switch, but it still tripped!
The cable feeding the tranny is a 2 core black sheath so I’m assuming it’s been wired to an existing ceiling rose or junction box.
The fault has to be between this and the switch but we can’t access them without a lot of messing about and because I’m not the best with spotlights anyway (can’t stand them) I was hoping someone might have some ideas? Am I right in thinking there is only one tranny? I’ll post some pics, cheers!


They were on a dimmer switch so I changed that first to a standard switch but it still trips.
I assumed it was a transformer issue so I pulled a couple lights out until I found it and disconnected the mains from it keeping the live and neutral separated and then tried the switch, but it still tripped!
The cable feeding the tranny is a 2 core black sheath so I’m assuming it’s been wired to an existing ceiling rose or junction box.
The fault has to be between this and the switch but we can’t access them without a lot of messing about and because I’m not the best with spotlights anyway (can’t stand them) I was hoping someone might have some ideas? Am I right in thinking there is only one tranny? I’ll post some pics, cheers!

