Discuss Tell us about your faults! in the Australia area at ElectriciansForums.net

Oh definitely! What I pay usually rounded up to nearest £5. Doing a fuseboard change on weekend, going to round that up to £100. Got to re-route and extend every cable to new position..gunna take hours!!!!
 
I personally do any work at my mums or grans absolutely gratis.
rewired both houses a few years back.the way I see it is they looked after me my whole life and I'm eventually gonna inherit both houses anyway!

that said, I do charge mates etc for materials.usually around 10% mark, and get the labour in the form of something from them that they can do for me.i have a decorator mate that I have an odd deal with.he will fix any f!ck up I make at a customers if that ever happens, in return I will do electrical work for him to the value of. so far never needed him!
 
The fuse board change on weekend is bfs parents house..they haven't looked after me for years etc!! I wave the labour in exchange for all the Sunday roasts haha.
i don't technically charge my parents, I get my dad to subtract the small material figure from the billions I owe him..he has a spreadsheet with a breakdown!! The odd fivers I've borrowed over the last 20 years are on there! I have no houses that I will inherit..u r lucky!
 
The fuse board change on weekend is bfs parents house..they haven't looked after me for years etc!! I wave the labour in exchange for all the Sunday roasts haha.
i don't technically charge my parents, I get my dad to subtract the small material figure from the billions I owe him..he has a spreadsheet with a breakdown!! The odd fivers I've borrowed over the last 20 years are on there! I have no houses that I will inherit..u r lucky!


Ah the ever open ''Bank of Mum & Dad'' i know it WELL!! lol!!

I stand absolutely no chance of ever seeing any return of the many loans and hand outs made over the years!! At least they do appreciate it though...

Hell, if i had kept a spreadsheet on all those transactions, i'd be scaring myself silly. Better to give and forget, ...and be blissfully ignorant!!
 
that's actually insane. did you even charge em? not sure I'd have bothered tbh.
imagine a light that works, one day stops and instantly assuming they need an electrician.
surely EVeryones initial reaction would just be to replace the lamp?!
eh?
and dont you think they would bill you for summat...if they had half the chance....
get em charged....
its your time innit...
 
and then Kate said she did another job there and was an 80 minute round trip, to which I then agreed.

but there are some if its very close by, and something stupid, I don't charge. not always mind. depends on their attitude a lot of the time
 
Nice one today. Customer getting a tingle in wet room shower for a couple of weeks. Only tripped RCBO today so he called me. 167 v measured from rubberised cap and cove floor to earth. Rcbo only trips when he touches wet floor and shower water feed. Plumber had screwed pipe clip into 10 mm shower feed and it was tracking down to floor. Shame rcbo didn't see it when shower was running.
 

Reply to Tell us about your faults! in the Australia area at ElectriciansForums.net

Similar Threads

I need your help please once again in tracing a fault. Am DIY but not clueless. Converting former kitchen into 2 rooms: bathroom and laundry. The...
Replies
24
Views
2K
Please advise what I should test / check next. My usual qualified electrician who did all of the work here is in Ireland for 4 weeks and not...
Replies
45
Views
3K
I'm writing this mainly hoping something occurs to me while writing it! I got called to an occasionally tripping RCD. It's a Hager double height...
Replies
19
Views
2K
Good evening, I have recently moved into a new home and I am having problems with the MCB/RCD tripping (Mem M6 Type 3 - 30mA). It intermittently...
Replies
8
Views
1K
Hey all, I'm looking for some advice to help me troubleshoot my strange issue with my consumer unit/fuse board on which my RCD keeps tripping...
Replies
25
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock