What is the maximum output voltage permitted on a 230 / 115 Volt Shaver socket?

[Sparks1974]

What is the maximum output voltage permitted on a 230 / 115 Volt Shaver socket?

 

[DefyG]

230v

 

[Avo Mk8]

230v

I believe the product standard used to be a lot higher. Off load I thought it was about 270V.
If someone has an older model it could be suppling more than 230V.

Edit - there was a thread here three years ago with some of the details. My post #25 refers.

Post in thread 'shavers only ! toothbrush charging debate.'

Feb 22, 2022

The pictogram is defined in the standard, so I assume putting it on the outlet is a prerequisite for compliance.
You've made me think, perhaps the issue is all about too little load.
The standard allows a no-load transformer voltage of 275V
Maybe the issue is, with a 1W toothbrush charger, the voltage could be higher than the charger is rated for?

• Avo Mk8

 

[DefyG]

Off load I thought it was about 270V.
If someone has an older model it could be suppling more than 230V.

Agreed, 'Off Load' the Output Voltage could be higher than the 'Nominal 230v' expected.
I recall investigating a supposedly faulty unit and recording 246v but under load that would drop back a bit to within specified limits?
I don't have a copy of the product standard but there would also be a tolerance (+/-) on the output.

 

[mainline]

What is the maximum output voltage permitted on a 230 / 115 Volt Shaver socket?

With a transformer.

Neither the rated supply voltage nor rated output voltage of a shaver supply may exceed 250 V AC The no-load output voltage is not to exceed 275 V and the difference between the no-load output voltage and the output voltage under load shall not exceed 20 % of the load output voltage.