drivers

  1. H

    MCB Drivers 20 Characters

    I have CK Modulo drivers size 1 and 2 that i use on Consumer Units but i'm wondering if anywhere does a size 3 for tails going into main switches. Or even vetter a size 3 for a torque screwdriver. Anyone able to point me in the right direction?
  2. J

    Powering on 10 Meanwell HLG 240 LED drivers.

    Hello guys. I have 10 x HLG-240 1400A drivers, which will run at 250W each. The problem is, I did not know about the surge upon starting each driver, apparantly I cannot start more than 2 drivers at once per UK plug socket... Please see attached. I guess I could buy 10 different plug in...
  3. D

    Impact Drivers

    Hello I'm an apprentice sparks I was wondering on a makita impact Driver, it says 5Amps 18v on the battery, if the wires in the body of the drill were exposed and someone who was using the drill touched the wires what would happen ? I was told at College around half an amp will kill you so I...
  4. J

    torque drivers

    Afternoon Had my annual niceic assessment today (only DI mind) Showed him a rewire I done few months back- literally had nothing to 'pick at' only thing he said is when I was un-screwing the mcb to get end to end reading- I just used a normal screw drive- and I should be using a torque one...
  5. Ib≤In≤Iz

    Angry Drivers

    This one is great :laughing:
  6. zone77

    LED driver problems

    help needed please! i have installed a 12v constant voltage, 16W LED driver with 3x 5w LED mr16 lamps but they keep going on-off! the driver does seem warm as if overloading. what am i doing wrong??
  7. A

    Wera Kraftform Kompakt any good?

    Anyone using these? Looking for something to use up ladders in loft spaces/ceiling voids. Came off site another driver down yesterday must have fallen out my pocket in the void. Never been a fan off this type of tool as I think they'd 'round off' after a while but I use wera drivers and they are...
  8. M

    DALI Control systems - Do i need different drivers?

    I have a project in a hotel that has a DALI control system We are supplying LED downlights that are dimmable on the DALI protocol but they also want other lighting ground lights and wall lights that do not need to be dimmed. Question is will they still work on the standard LED drivers or do...
  9. polo1

    Ck Modulo Insulated Drivers

    And another one bites the dust! I like the CK insulated drivers, but I've broken the tips off three of the smaller Modulo drivers in the past six months. Can you recommend an alternative +/- driver which will last the pace?
  10. H

    Led Drivers

    Evening chaps, when selecting drivers do we need to allow a margin over the lamp wattage ? Say a 10 w for a 6w lamp or is a 6w OK for a 6w? Cheers
  11. N

    12V LED Drivers

    I am gradually replacing filament & halogen bulbs with LED versions. Whilst some LED lamps work okay with standard 12V transformers, the transformers don't like low current devices, resulting in flickering. Since the idea is to save money and energy, I don't really want to outlay large sums of...
  12. S

    LED MR16s on DC LED drivers

    Struggling to find a consensus on this - is it OK to power MR16 LEDs off a DC power source? I have been asked to do this by a customer who has bought the lamps and transformers himself, but the MR16s actually say AC on them so I'm uneasy about it. He says he has connected them temporarily...
  13. stidge

    LED Drivers

    Hi all, Have fitted out new kitchen for customer , the kitchen company have added 7 Drivers for cabinet lighting,It looks like heathrow airport ! My 6 gang grid switch is feeding lights . there s approx. 700- 900w max on ltg cct. Its tripping MCB when introducing U/C lights. Is this because of...
  14. Darkwood

    Idiot drivers!!!

    Some idiot in a silver car nearly ran me off the motorway, I tried to give chase to get his reg' and wasn't doing bad keeping up, when I say wasn't doing bad, well, as I approached 90mph the ----er totally disappeared in a lightning flash and all I could see were two fiery tyre trails... Please...
  15. M

    Drivers for DC Isolators??

    Hi Guys Has anyone ever come across a need for Drivers for DC Isolators? Many Thanks
  16. G

    12v mr16 Led

    Hiya Never fitted a 12v LED spot lamp yet, will I need to change out the transformer to a driver or is it self contained in the lamp ? Are they any good compared to mains gu10s. Quoting a led upgrade and can swop out bathroom fittings from 12v to 240 as the customer wants a few lamp types as...
  17. W

    Mounting LED Drivers

    I’ve got a project which has 10 LED Surface fittings whichhave separate drivers and are DALI controlled. It’s not possible to put the driversnear the fittings and they need to be mounted centrally. There is no problem withthe cable length/ sizing between the two. The architect has suggested...
  18. vini

    LED driver

    I am looking for an LED driver XY-50W 10S5P. Input - AC 240v Output - DC 26-36v There are plenty online from China, but does anyone know a UK supplier for the item above or equivalent? All the drivers here seem to be 12v
  19. S

    Difference between Drivers and PSUs??

    Whatbos the difference between an LED 'driver' and a 'PSU'? I have been steered towards some divers to power some 3w 3v 900mA Cree LEDs (link below) but they still require the equivalent power input from a PSU. So what does the driver actually do...
  20. D

    Wera Kraftform Drivers And Tool Bag

    Alright everyone, So this morning I snapped my last Facom driver that I've had since the start of my apprenticeship. That's a good 6 years! I was gutted to say the least, so I drove round a few wholesalers to see what deals were on and bought the Wera Kraftform 16 piece set, they look the part...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock