Hi
Basically I just want to know what is required to fit a sensor in my bathroom and do away with the light switch completely. I'm having a new stud wall built with a pocket siding door inside the wall. So the joiner said I'd need to get a pull down light switch so there would be no wires in...
Been to fit new led pir flood. 3core +e. Perm live. Sw live. N e.
Flood is 2core. So wired it perm live set up works a treat. Customer rings up wants it on switch. After investigating switch is a 2 way.. any way of doing this so works on pir then on with switch.
It's a sealed led...
Could you please explain this to me? How does it work? How can you identify if its faulty or working?
... I am talking about the sensor which has long wire and a tube in the end. Its shown in the following link:
Dimplex 86661 TSB Room Sensing Stat (Storage Heaters) -...
Hello all,
I am looking to install an xpelair 12v fan in a bathroom with a humidity sensor (model no. 92970AW). I can't quite work out from the instruction manual whether the humidity sensor is in the fan itself or in the transformer. due to the size of the bathroom and the position of the bath...
hi all,
Got a 2 gang switch in my utility one for frourecents and one for a outside light.
Thing is I want a pir switch just to do the utility lights and switch the outside separately without chopping in another switch , found this and was wondering if it was any good
GI2DPC - 2 Gang Green-i...
hi
im having an issue with a pir detector currently installed at home, it is on the top of a wall which is approx 5ft high, mounted on a bracket so it sits above the line of bricks by about 200mm,
i am getting a lot of nuisance switching, have replaced the sensor but still happening, i am...
Hi everyone! I've recently finished first fixing an extension and they have had a large lantern window fitted with a motorised window, needs power and there's a rain sensor to wire too, these go back to a control unit on the wall. I have put 2 x 3c+e to the window area from the controller to...
Hi all
I wonder if you guys can help me and point me in the right direction, we are after a 12V Proximity sensor that is waterproof to put on the back of a truck, when a solid item gets within the sensors range we want it to trigger a Light/LED, I know how to wire it up but struggling to find...
I have a 500W Security light with a built-in PIR sensor.
See: https://www.amazon.co.uk/gp/product/B005OB0MVW/
It works fine, but if I'm outside at night I have to move within range every few minutes to keep it on.
So what I want to do is fit a switch to bypass the PIR.
The four-way terminal...
I'm looking for a PIR sensor that will replace a standard light switch but the ones I can find are £40+, which seems a little silly considering you can get a standalone wall mounted PIR for about a tenner. Any recommendations anyone?
Chaps, this guy has 16 x 40w led panels in his office. Now he wants them all switching by one occupancy sensor. But I'm concerned about the start up current, is there a sensor available that will cope? Or one that anyone can recommend. Cheers gents
My customer read on many forums about people suffering to solve a problem with the above Land Rover with regards to a fault code known as P1260. It seems many people have used trial and error methods to resolve the problem but as far as he could see nobody found a fix, or nobody had posted a...
Although prob easy question, I am installing my first heat mat and am wishing to make sure that the floor sensor is fitted right !
I have got some small tube that I'm pretty sure the sensor goes inside and protects it when it sits in chase in floor before self levelling goes down. But do you...
Fitted a new outside light for customer and dusk to dawn lamp, the lamp keeps flashing off and on every 20 seconds.
Found the fault to be the reflection from the clear plastic housing is lighting up the photocell and causing the lamp to switch off, then in darkness the lamp switches on again...
Hi guys, whats your opinions on isolation of sensors/lighting arrangemant with following scenario all in a domestic situation only?
1-proximity sensor in hallway or landing?
2-outside pir light?
3-door switch in a cupboard?
must there be a switch or key switch or can the sensor have a permanant...
Hi I am needing to adjust a 1 way switched outside light at a house in a couple of days to switch 2 way possibly with an ip rated switch on the way to the front door as it's only switched 1 way from inside the porch at present. I'm just thinking of instead of an exterior switch of using a...
I have a request from a customer who basically wants a number of LED floods installed. However he wants it set up that all the lights come on when any PIR picks up motion.
1 light will be a lot more labour intensive than the rest, but he's looking the sensors in awkward locations in regards...
Afternoon all,
I've got an external bulkhead light to fit for someone, Basically they want it on some sort of motion detector, But something discreet. So I had a look at something like this to go inside the fitting (room permitting)
Kanlux Rolf Indoor Plastic 360 9M Microwave Motion Sensor...
Hi guys I bought this motion sensor from lidl thinking that I will add to my floodlight and it will become my outdoor sensor light but can anyone tell me if I m wrong and how does it work
Good evening,
Ive had a request from a customer to have to wall mounted garage lights illuminate for approx 4/6 hours controlled via a dusk to dawn sensor however when this time period expires they then wish the lights to operate via a PIR similar to a standard security light such that when an...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc