Basically, the room in which i am talking about has a twin and earth feed from a switch downstairs which was originally for an outside light. The client would like to take that feed and use it for an extractor fan in the new converted bathroom. The cable used is twin and earth. If i were to make...
jamest4541
Thread
bathroom
client
earth
extractor
extractor fan
fan
lighting
twintwin & earth
wants
Looks very professional when used for switch drops but...
And I am braced for impact.. :eek:
How do you know which is feed and return?
Installed a 12 gang grid switch and used Brown/Brown and when wiring up the switches was wondering if there is a trick to knowing which is which.
Was a bit...
So i went to a job and i came across this the house is 19yrs old and apparently this is how it was when they moved in from when it was built its the twin and earth that runs to the consumer unit I am looking at there is some 10mm earth to the gas meter that has been fitted at a later date.
plancaster
Thread
and earth
earth
meter
meter tails
tails
twintwin and earth
used
IEC 60364-5-54 states that phase conductors 16mm2 and smaller require a CPC of the same size, over 16 to 35mm2 a 16mm2 CPC and over 35mm2 a half size CPC is required.
My questions is why am I seeing catalogs with harmonized twin and earth with reduced size CPCs over 2.5mm2? And why doesn't the...
Hi guys, I had to carry out some alterations to a domestic installation the other day and was pleasantly surprised when having to run a new circuit how neat the CU was. It had 75mm metal trunking installed to the CU with bass bushes installed. A lot of effort had gone in to it to keep it neat...
hi, just a quick question for installing a 32 amp hot tub a friend told me it HAS to be in SWA but I have seen lots of 32 amp tubs installed with 6mm twin and earth in conduit, Is he correct? and is there anything in regulations not allowing me to use twin and earth in conduit? many thanks
adam1852
Thread
friend
hot tub
installed
installing
installs
question
quick
swa
twin
Hi all
Went a job this morning to check out vent axia Gemini twin fan...the ducting type that sits in loft and takes air from loft and vents it into bathroom as far as I can tell by piping this is all that it does. I tested upto unit on both switch side from light and the permanent supply both...
I've got a RFC that I need to split into two 20A radials.
I've looked in the BBB but it doesn't state the current carrying capacity of twin and earth in surface mounted trunking (reference method B).
I've had a little look online and I think that it might be 23A (before taking other derating...
Came accross a re wire were the sparks first fixing had used 3 core cables down to every switch baffled as to why on 1 ways etc supervisor called it smart wiring ? Anyome else come accross this ?
I am looking to join 2 cables for an outside security light. The mains cable on the existing light is 8mm flat twin. But the new light is a 6mm round twin.
I can't rewire as it goes into the wall to the socket. So was looking at an ip66 connection. But can't find one that does both sizes.
Any...
I have popped this in the video section but thought it might make an interesting debate
Handyman Chris has fitted some nice pvc pipe for his cable but rather than use conventional singles has pulled in twin and earth. Which seems odd when you have gone to the effort of fitting conduit pipe...
Hi Lads,
You might think i'm a di*k already from the forum title but I desperately need some help. I've got a small business and if I wasn't skint, i'd obviously have an electrician come to advise me. I added some kitchen equipment to the warehouse - most of the equipment can plug in to the...
Hi,
Trying to plan for my single outside lighting circuit to be controlled by two PIR's.
I've tried to draw it out (image below). My plan is that if the PIR switch is on and light switch is off, the lights will run with PIR. If the PIR switch is off, and the light switch is on, then lights...
rjwill10
Thread
circuit
electrical wiring
lighting
lighting circuit
off
pir
switch
twin
I have run 6mm t and e through the house from the db in the garage on a 32 amp mcb which is rcd protected. the 6 mm cable then goes into the back of an ip66 rated JB on the side of the house. i then intend to run 2 core (live and neutral) 6mm swa up to a workshop using the armour as earth.
my...
A032701
Thread
6mm
and earth
armour
cable
connect
earth
earthing
how to
swa
twintwin and earth
My daughter has some 7 core armoured cable running to her garage which looks to be 1m2 or possible 1.5m2. It carries a 2-way external light switch connection to switch on 2 external lights ( house and garage) from either the house or the garage, and there is also a single 13amp socket connected...
keithy1959
Thread
and earth
armoured
core
earth
twintwin and earth
using
Hi all
I have the misfortune of correcting someome elses work
I have two commodore pumps, one room st and one cylinder st plus a standard boiler... how do I connect them all together?
I can get everything working but have no independant control over each zone....
Been on a quote this morning to provide a new circuit for oven and hob in a kitchen, Customer says Cu changed about 2 years ago, they have been in house just a few months.
Gas, CU and cutout all in recessed cupboards in kitchen; face value looks okay. then I see the wiring is poorly dressed and...
Today I found a free standing cooker connected with T&E cable. Since the cooker is bordered by cupboards it is regularly pulled forward about a metre for cleaning the unit and the floor beneath it.
This forward movement extends the cable to full stretch while pushing it back makes it hang in a...
Wondering about T&E outside, not ideal we are told due to the UV rays overtime breaking down the outer sheath.
Saying that I come across quite a bit when house bashing that has held up well and shown good IR tests.
On a data sheet for some T&E I ordered was this little paragraph:-
"Not suitable...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc