3 phase - DB instead of cartridge fuses ?

[cristiano]

hello, I am doing the wiring in 8 flats and a comunal area.

i have 3 phase supply at the bottom and i am wondering if i can put the 3 phases into a 4 way DB first. then i am thinking to leave meter tails coming out of the trunking for each meter which will be installed.

is this something i can do or do i have to install that old box with cartrige fuses instead of the DB?

so, i have the main head, but the 9 meters are not there yet.

thanks

 

[Brightspark2]

So this is all on the consumer side?...you have your cut out and suppliers meter then you want to go to a DB and from that to meters for each flat?...

Sent from my Xperia S using next doors WIFI

 

[cristiano]

So this is all on the consumer side?...you have your cut out and suppliers meter then you want to go to a DB and from that to meters for each flat?...

Sent from my Xperia S using next doors WIFI

I dont have a 3 pahase meter after the cut out. i need to have 9 separate meters for each falt.

i thought i can go from the cut out straight into the 3 phase board and then in the meters and then from the meter straight into the 16mm twin and earth wich supplyes the consumer unit in the flat.

will the meter people be happy with that?

thanks

 

[Engineer54]

What you need is a ''Ryefield board'' (not sure if the spelling is correct lol!!) That will house the main supply fuse for each flat/apartment.