Discuss 30ma rcd tripping after replacing consumer unit in the UK Electrical Forum area at ElectriciansForums.net
Never energised a circuit without testing it, are you sure?
No....
When changing a board I carry out the dead testing on each circuit as im terminating them in to the new board.
I guess that i've come a bit unstuck with the fault in the ch system being detected by the 30ma rcd. I'll get it sorted tomorrow.
Yes, re energised the circuit which i should have tested first. Have you ever energised a circuit without testing it?
This ain't no wind up, just felt like seeking a bit of advice before going back to work tomorrow.
That's exactly what I do, I will have also carried out certain dead tests prior to agreeing to the work so i know what I'm in for.
Reply to 30ma rcd tripping after replacing consumer unit in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.