- Reaction score
- 2,602
See my reply on your other thread with same title.
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
- Thread starter kels bels
- Start date
Discuss 4 'unknown' switches operating hallway lights not working in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
E
Engineer54
This certainly sounds as if it's some sort of ''impulse relay'' system.
If you can hear the relay clicking when you press/ touch these switch plates then it's doubtful anything is wrong with the relay. My guess is that one of these touch plate switches are faulty, not allowing the impulse relay to change over/release...
If you can hear the relay clicking when you press/ touch these switch plates then it's doubtful anything is wrong with the relay. My guess is that one of these touch plate switches are faulty, not allowing the impulse relay to change over/release...
Reply to 4 'unknown' switches operating hallway lights not working in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Similar Threads
Hi everyone
I've moved into a flat and I've decided to replace the original electric switches and sockets with white ones. I've done them all...
I hope someone can help with this as I'm stumped. My landing hallway ceiling (2016-build house) has two rose pendants which I've attempted to...
Hello,
I'm replacing standard light switches in my hall and landing with touch switches (not smart, just touch on/off) like these from Amazon...
Hi all.
Removed an ancient light fitting, replaced with a newer one, the light comes on but can't be turned off with the switch. It was working...
My kitchen has track lighting.
It consists of three halogen light bulbs.
I've had the fixture for more than 25 years with no issues.
Last night...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Garo Entity ProThe Garo installation manual implies both the 'owner' and 'installer' need the app to complete...
- Latest: Avo Mk8
-
Indesit oven error F53 code / no longer heating upDid you turn off the power to the oven for a long time? Comments on the web suggest that a...
- Latest: Avo Mk8
-
Does a SPD need a dedicated MCB?Some contain an RCD which are not mechanical they are PCB based and hence do not comply to BS7671.- Latest: westward10
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.