Discuss Anyone know where Shakey is or heard anything? in the Industrial Electricians' Talk area at ElectriciansForums.net

Oh no he's back :p
................
...............
................
.................

Only joking me old mucca.
Had a good break then mate?

Glad to see you've not gone missing permenantly................... get the BOW open :D
 
Thanks to all the peeps that welcomed me back

Had a good break, sank a few, done some serious chiilin, (managed to throw in a cheeky little rewire as well:p)

I replaced the earth bonding, put in a JB every two metres (and put Rums name on each one), filled in a Minor Works for the entire job, then was home in time to fire off my JIB application:p

cheers guys, I missed ya!
 
Are you sure you are COMPETENT to fill in that minor works cert:D

oh i'm quite sure i'm not old chap......


quite, quite sure

i got confused during the job

the cables the guy in B&Q said i needed were brown and blue, but the last sparks that had been there had put in red and black! Doh!

take me ruddy ages to paint them all the correct colour

oh, and the cooker only works if i switch on the socket i put next to the bath:)
 
Shakey I am surprised at you.
You only needed to paint the black one blue the red one turns brown if you run along it with a cigarette lighter flame! :eek:
You were lucky I've had to spend hours before now putting a yellow stripe on the green wire.
Glad you had a good break
 
Shakey I am surprised at you.
You only needed to paint the black one blue the red one turns brown if you run along it with a cigarette lighter flame! :eek:
You were lucky I've had to spend hours before now putting a yellow stripe on the green wire.
Glad you had a good break

cheers Tony

tried the cigarette lighter thing but the floorboards kept catching fire

yellow stripes on the green wire......erm what green wire:confused:

i just used a bit of fuse wire, wrapped it around the gas pipe and shoved the end in one of the sockets.....well it aint gone bang:)
 

Reply to Anyone know where Shakey is or heard anything? in the Industrial Electricians' Talk area at ElectriciansForums.net

Similar Threads

We have a meter EDMI - ES30B fitted to our property. I understand from the fact sheet for the smart meter...
Replies
13
Views
2K
In July I moved into my new home with Schluter DITRA heated floors in the bathroom. The floor quit working in December, and my GC and a rep from...
Replies
0
Views
316
Anyone suggest an alternative to the below? https://lightsaveled.com/products/architectural/ls-sky They’ve been specified on a council job and...
Replies
4
Views
907
Hi Basically I have visited a youtube link of another electrician and he is talking about how many electricians find RCD fault very hard to...
Replies
24
Views
3K
Was having a poke around the old man's house today. Anyway. DB is under stairs (18th ed following a recent extension. Not done by me but it's...
Replies
7
Views
692

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock