1
1smokinace
hi, has anyone ever come across an immersion heater where the white pre fitted cable would be the neutral? im pretty sure the said piece of cable would go to the stat with the feed (brown L) going to the other side??? the reason i ask is ive just asked to a neighbours home where she has a e7 water heater fitted along with a standard water heater, the thing is a so called spark has recently been and fitted a new (lol old/used) water heater for the e7 but it isnt working, there is power to it at the set times but as i said the pre fitted cable was connected to the neutral of the feed flex. would this make a difference? a link was also fitted by mr lol sparky to the other terminal from the stat., weird?? the thing is he has skanked the old dear, charged a fortune for what looks like the old water heater with a new stat, (b&q£8). am i right in thinking to test i should get continuity through the water heater element but nothing between the element terminals and earth? mr sparky lol wont come back and refused to give the old dear a reciept. knob. anyhoo im goin to redo the job for the old dear for about a 3rd of the charge he made. should be shot. ps he did this without draining the cylinder, funny as the heater in question is at bottom.
Last edited by a moderator: