Bedroom lights without earths | Page 9 | on ElectriciansForums

Discuss Bedroom lights without earths in the UK Electrical Forum area at ElectriciansForums.net

Car123

DIY
Joined
Nov 4, 2020
Messages
69
Reaction score
17
Location
Cornwall
Here is another question. In my bedrooms 1 light is earthed and two are not. The lights are pendants..All plastic fittings. I have been told there needs to be further investigation. The investigation apparently needing to get up in to the loft to look for the earth. This is a problem for me as the loft is looked and choker block with my stuff. Loads of it. The loft is locked and I am not sure where the key is. (Lockdown intervened(.Anyhow I have asked the electricians why they need to investigate further. I said I thought it was okay that bedroom lights are not earthed with plastic fittings. They just dont answer. I am feeling a bit desparate about it as I have 28 days to complete the work
 
Seems to me that you will go to any lengths to avoid clearing the crap out of the loft and you are on here looking for a loophole

Did you get the trunking sorted?

How did you get them both to agree?
Last friday by email I asked for clarification on what they were telling me. I was told that this was regs. I asked again for clarification. I apologised for being ignorant but said I wanted to clarify the situation. I heard nothing back. I emailed again twice. Then today I was told that A had spoken to B and C and that it was okay. I am grateful for advice on here. It's disappointing that a certain poster needs to be aggressive
 
Last friday by email I asked for clarification on what they were telling me. I was told that this was regs. I asked again for clarification. I apologised for being ignorant but said I wanted to clarify the situation. I heard nothing back. I emailed again twice. Then today I was told that A had spoken to B and C and that it was okay. I am grateful for advice on here. It's disappointing that a certain poster needs to be aggressive

Last friday by email I asked for clarification on what they were telling me. I was told that this was regs. I asked again for clarification. I apologised for being ignorant but said I wanted to clarify the situation. I heard nothing back. I emailed again twice. Then today I was told that A had spoken to B and C and that it was okay. I am grateful for advice on here. It's disappointing that a certain poster needs to be aggressive

I’m really intrigued to find out why you don't want people in your loft.
I would really like you to come in the loft never mind that the electrivian just came up. He wants your address
 
Remember that while they will point out the need for an RCD and hence cpc as they are working to up to date standards, the installation was correct at the time of installation and as far as I know should be listed as needs to be done but not failed.

just my uneducated opinion.

I believe that there are dates for when 18th edition applies for all work being designed after a certain date.
 
Last edited:
Remember that while they will point out the need for an RCD and hence cpc as they are working to up to date standards, the installation was correct at the time of installation and as far as I know should be listed as needs to be done but not failed.

just my uneducated opinion.

I believe that there are dates for when 18th edition applies for all work being designed after a certain date.
Yes I think you are right. I am a bit annoyed as when they were doing stuff in there before with all the floor boards up I asked the electricians if anything else needed doing and he said no. It would have been relatively simple than to earth those bits that aren't. As I explained over half the house is. They have contradicted themselves about it all now. There is the electrician who did the work, the guy in the office who does the estimates and the owner. They are all electricians. The electrician who did the EICR said it did not need doing. Then the guy in the office said it did. After querying this one week later the guy in the office said he had spoken to the owner who said it didn't. So all they need to do now is put a clamp on the bonding, replace a cracked switch and glue the ruddy trunking..I am told that there are so many landlords needing these EICRs doing that it will be impossible to get them all done by April when they are due. I am just relieved that I have got mine. I am also lucky that my tenant who is an academic works from home a lot of the time and is very good at letting workmen in and is not too paranoid about Covid. I have been told that some tenants won't allow gas checks never mind EICRs.
 

Reply to Bedroom lights without earths in the UK Electrical Forum area at ElectriciansForums.net

Similar threads

Joining the ends of the radials together to form a ring, and changing the circuit protection to a single 32A would solve the MCB overload problem...
Replies
8
Views
669
  • Question
One of those backlight Chinese testers may have helped that’s if the tester didn’t catch fire or electrocute you. LED TV Backlight Tester 12W LED...
2 3 4 5
Replies
68
Views
4K

Recommended Sponsor News

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top