- Reaction score
- 1,693
This might swap for your existing front plate:
Sorry that's satin not polished!
Catalogue:
Think the one for you is VPCH402, but check!
Last edited:
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
- Thread starter andycrookes
- Start date
Discuss help - im stuck changing a light switch for my bathroom (with fan) in the DIY Electrical Advice area at ElectriciansForums.net
Sorry that's satin not polished!
Catalogue:
Think the one for you is VPCH402, but check!
- Reaction score
- 1,693
I think I'm right in saying you cannot use the fused spur you have bought to replicate the circuit that's wired.
You appear to have a fan with an over-run timer, so that it continues for a set time after the light is switched off.
For that you need an unswitched but fused live connection, but there's no such terminal on your new switch/ fuse for that.
I think your best bet is to replace just the front plate on the arrangement you have.
or get an electrician!
You appear to have a fan with an over-run timer, so that it continues for a set time after the light is switched off.
For that you need an unswitched but fused live connection, but there's no such terminal on your new switch/ fuse for that.
I think your best bet is to replace just the front plate on the arrangement you have.
or get an electrician!
Reply to help - im stuck changing a light switch for my bathroom (with fan) in the DIY Electrical Advice area at ElectriciansForums.net
Similar Threads
Hi
I want to add a light to my attic.
There is a single switch on the landing that I want to change to a double switch and then use it to still...
WIRING FOR WALL SMART SWITCH FOR CEILING FAN/LIGHT
Just bought a smart wall switch for a ceiling fan/light currently connected to a single switch...
- littletwinn
- DIY Electrical Advice
Hi
I'm looking for some advice for adding a time delay on my parent's shower room fan.
My parents had a section of their garage converted into a...
I hope someone can help with this as I'm stumped. My landing hallway ceiling (2016-build house) has two rose pendants which I've attempted to...
Hi, have an old bathroom fan. Which has two wires the black and red (line and neutral).
The fan has no isolator switch and was powered when the...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Fuel Gauge needle moving with revs issueThe diagram you posted for the non battery model has 4 pins, there are only 2 wires to the...
- Latest: plugsandsparks
-
-
can i book appointmentwell this will make you chuckle,this morning sent a customer an email regarding some work they...- Latest: buzzlightyear
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.