Immersion switch

[luke teague]

Hi, i looked at a job last week and there where two switches for the immersion one is off peak economy 7 and the other has power all the time (not economy 7)
The problem i have is the customer want to use economy 7 and have the other switch as a boost. I have just got an economy 7 timer thinking that i would be able to wire both in so client has economy 7 and boost on the one immersion.

There is only one immersion in tank and thats on top.

I dont want the economy 7 to become live when its not meant to via the normal supply.

I can not think how to wire this as normally you have 2x immersions.
Is there a way i can wire in the horstmann economy 7 timer to use both supplies?

How would you guys go about it?

 

[simopesh]

Hi there

What you want to do is not really desirable because top loader 17inch is design for off peak purposes.
On the other hand a dual pole Sangamo clock 25amp will do the trick!

Good luck!

Hi, i looked at a job last week and there where two switches for the immersion one is off peak economy 7 and the other has power all the time (not economy 7)
The problem i have is the customer want to use economy 7 and have the other switch as a boost. I have just got an economy 7 timer thinking that i would be able to wire both in so client has economy 7 and boost on the one immersion.

There is only one immersion in tank and thats on top.

I dont want the economy 7 to become live when its not meant to via the normal supply.

I can not think how to wire this as normally you have 2x immersions.
Is there a way i can wire in the horstmann economy 7 timer to use both supplies?

How would you guys go about it?

 

[luke teague]

Problem solved mate the supply was on a multi rate meter so used the one supply.
No need for the economy 7.