Discuss intruder alarm problems in the Security Alarms, Door Entry and CCTV (Public) area at ElectriciansForums.net
i think zone 1 is pre set as the entry or exit zone and this is what sets the alarm when your going out so you will need door contacts in zone 1 or unless you program zone 1 as a p.i.r zoneHi
I have been doing my first intruder alarm its a honywell accenta gen4 mini. I am only using 2x pir sensors 1 panic alarm, 1 key pad, and 1 sounder. The first pir is above the entry/exit door so I am not using any door contacts. once I set the system the pir's are picking up movement but not soundin the alarm. I think its the programing that I have wrong but dont know what to set any tips ?
Reply to intruder alarm problems in the Security Alarms, Door Entry and CCTV (Public) area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.