omnipolar circuit breaker

[mswesty]

hi
just rewired a house where the kitchen will have a induction hob . as the title states . the manual recommends a dual pole circuit breaker to protect the hob .
does any body know why this is ?

regards
m

 

[Engineer54]

It wouldn't happen to be a German made appliance would it??

 

[Deleted member 26818]

hi
just rewired a house where the kitchen will have a induction hob . as the title states . the manual recommends a dual pole circuit breaker to protect the hob .
does any body know why this is ?

regards
m

Does it recomend dual pole, or omnipolar?

 

[Dcf]

never fitted one yet on a DP device it will work just fine on a single pole mcb

 

[gdr7671]

This only will be applicable if you have a TT system. It is irrelevant with a TNCS or TNS system.

 

[malcolmsanford]

I would say that if your utilizing a dual RCD board, as the RCD is double pole or in this case omnipole without the CPC being classed in the omni part of it, as that should not be broken, then there should be no problems