M
mandinga1975
Hello all
Hopefully one of you can help me with this as I cannot see the wood for the trees?!?!
Have to wire a radial with a 1 way switch (controlling 1 lamp) and 2 two way switches (controlling 1 lamp).
The wiring run goes from the CU to the first lamp (which subsequently goes to the 1 way switch) - all using PVC twin and earth.
The wiring then goes from the 1 way lamp to the 2 way lamp - loop in (which subsequently goes to the first of the 2 way switches) - again all using PVC twin and earth.
My questions are as follows:
I presume that I will need to use 3 core cable for the link between switch 1 and switch 2.
If I loop in from one lamp to another wouldn't that link the 2 way switches to the 1 way lamp? I think this is a stupid question as you'd wire them seperately in the ceiling rose.
Thanks for any help - heads quite mashed at the moment with study and exams, but I've passed my exams for this certificate so just the installation to go!!!
Dan
Hopefully one of you can help me with this as I cannot see the wood for the trees?!?!
Have to wire a radial with a 1 way switch (controlling 1 lamp) and 2 two way switches (controlling 1 lamp).
The wiring run goes from the CU to the first lamp (which subsequently goes to the 1 way switch) - all using PVC twin and earth.
The wiring then goes from the 1 way lamp to the 2 way lamp - loop in (which subsequently goes to the first of the 2 way switches) - again all using PVC twin and earth.
My questions are as follows:
I presume that I will need to use 3 core cable for the link between switch 1 and switch 2.
If I loop in from one lamp to another wouldn't that link the 2 way switches to the 1 way lamp? I think this is a stupid question as you'd wire them seperately in the ceiling rose.
Thanks for any help - heads quite mashed at the moment with study and exams, but I've passed my exams for this certificate so just the installation to go!!!
Dan