RCBO not restting

[davesparks]

Trev..tell me bud, how do you get a Zs value from a dead circuit exactly? Read my posts before commenting
The job is not a freebie the boss pays for it.
I have calibrated testers.

Telectrix..spot on for getting it

Zs from a dead circuit is easy, you just use the alternative Zs testing method.

With the breaker open connect L to E at the far end of the circuit, test between the live and dead side of the breaker.

Simples!

As to how this could help you identify the fault, I am not entirely sure at the moment.


As far as your original post and the fault goes I would suggest that you did ask a bit of a daft question, you said the fault moved to with the circuit when you connected it to another RCBO so logically the fault must be on the circuit and not within the RCBO.
To properly test the RCBO you test it the same way you would a seperate RCD unit using the RCD test function of an MFT or a seperate RCD tester.


For general fault finding I would strongly recommend an analogue insulation resistance tester, it is much easier to work with a needle than a digital display. It doesn't have to be expensive or even calibrated if all you are looking for is the yes/no/maybe rather than measured values.


(And just in case anyone is wondering, yes I have been reunited with my happy pills this evening)

 

[Geordie Spark]

Sod the Christmas cheer.

Half baked op, no real constructive answers, we may as we'll be passing in the wind.

I think you and Tony could be vying for the post of Official Forum Grumpy Git.

You won't find it an easy ride though ... he's had a LOT of practice

 

[telectrix]

apprentice grumpy, geordie. he's an apprentice grumpy. :ack2:

 

[Geordie Spark]

apprentice grumpy, geordie. he's an apprentice grumpy. :ack2:

Apprentice ..... as highly qualified as that ???

Not just a 5 Week Wonder Grumpy Git then???

 

[Darkwood]

Sorry Parkside you are reported for abuse... if you feel others have done the same to yourself then use the report symbol at the bottom L/H of the post in question (the triangle)...

Reacting with agressive and immature language is not on regardless whether suggestive or not!... this is in the public domain and free to view by anyone on the internet, so please respect anyone may read your replies.

 

[tazz]

Please note debate by all means, but any abuse or bad language directed at any member will not be tolerated.

 

[shanky887614]

do your normal continuity tests etc.

if it keeps tripping there will probably be a short or bad appliance connected somewhere

 

[trev]

or bad appliance connected somewhere

The first thing is to ensure no appliances are connected. They might not like 500 volts up em when the time comes.

 

[Geordie Spark]

The first thing is to ensure no appliances are connected. They might not like 500 volts up em when the time comes.

They don't like it up 'em Captain Mainwaring Sir .. they don't like it up 'em!!

 

[TJ Anderson]

The first thing is to ensure no appliances are connected. They might not like 500 volts up em when the time comes.

250V range. There would be very few occasions when I would be using 500v on fault finding!