I tested a self test emergency lighting with three gears .While testing 2 of the gear doesn't passed 3 hour test but 1 Did Wit the same battery ?Why?
Yes,the idea is to test the battery duration first unit failed ,second unit also failed and passed in third unit.To confirm it again I tested a different battery on the first two unit that failed too.What may be the cause it doesn't meet the duration?
Yes three different units of same circuit design.First ans second failed duration at 150 mins as rated duration is 180,But the third one passed.First two also failed while trying with different battery.What cause that to happen?Please
If three separate units and you have tried different batteries then the faulty units are probably draining to much current.
Are the floro or LED.
I have replaced a few hundred old units over the last few years at work and we are now all LED.
We have dramatically reduced our fail rate.
Thanks for your kind reply.They are LED and gears are quite new design .We will test the units to sort it out.Thanks again
Could also be the battery you swapped were also duff.
I have had very few LED units fail.
Out of a few hundred maybe a handful have had to be replaced
I have had very few LED units fail.
Out of a few hundred maybe a handful have had to be replaced
Similar threads
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Advert
Thread Information
Advert
Advert
USA Electrical Advice
Welcome to the USA Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
UK Electrical Forum
This is the main UK Electrical Forum at ElectriciansForums.net. Electrician Laws and Regulations related to Electrics and Electricals within the United Kingdom. Electrician talk, questions and answers can be found in our UK electrical forum.