Discuss socket and see part p kit in the Electrical Tools and Products area at ElectriciansForums.net

R

robbalaar86

Ok guys I've been offered a socket and see part p kit for 150 quid I need it to gain registration to stroma are they useful or not worth it? Appreciate your thoughts
 
Kind of mate it's a set though PDRC 380 Rcd tester

PDL 300 Loop tester

DIT 400 Insulation continuity tester
Just wondered if they were any good
 
These are issued to BG guys were they either get a red fail or green pass led for a Ze but me thinks you need a tester that gives you a reading I think Metrel does a budget tester
 
Look at the site sponsor you can get a Metrel multi tester for £335 plus vat and dont get caught up with brand names because like Trigger says "Look after your broom.................."
 
The only thing is money is tight but I will do a bit more research into what's best for my pocket and career. Cheers for the help mate

Listen this is not a lecture here but being stingy on your tester will only cause you grief down the road if you can spend £400 on a new I phone then get a decent tester if not then your approach to this trade will not benefit you
 
I appreciate any advice mate especially if a slap round the face is needed I'm not one for expensive phones I have a contract that's the only reason I have an iphone. I am looking at a megger mft 1552 now second hand but 12 month calibration cert with it. Cheers for the advice
 
I appreciate any advice mate especially if a slap round the face is needed I'm not one for expensive phones I have a contract that's the only reason I have an iphone. I am looking at a megger mft 1552 now second hand but 12 month calibration cert with it. Cheers for the advice


best tester ever made IMO.dead esy to use. how much is it?
 
£250 and calibrated. snap his hand off. only thing i don't like about the megger is the case. mine's been transferred to a flight case with plenty of space for leads etc.
 
£250 and calibrated. snap his hand off. only thing i don't like about the megger is the case. mine's been transferred to a flight case with plenty of space for leads etc.

Yep the case is pants thats why I carry my Megger 1553 around in a Fluke carry case cost me £28 and worth every penny told the Megger rep but he did not get it as for the old megger case its free to anyone who pays the postage
 
i use my old megger case for my smaller test gear.
 
i use my old megger case for my smaller test gear.

I refuse to use it as it bangs against my leg as I go upstairs plus the Fluke case looks and is the biz as you can store all of your lead without having to tuck them in unlike the Megger box it also holds a lot of my nick knacks leads etc plus you can use it as a seat at the CU and its good to carry.

Still Megger rep not happy that I have a 1553 in a bright yellow Fluke case with FLUKE emblazed on both sides lol
 
I appreciate any advice mate especially if a slap round the face is needed I'm not one for expensive phones I have a contract that's the only reason I have an iphone. I am looking at a megger mft 1552 now second hand but 12 month calibration cert with it. Cheers for the advice

Sorry mate that wont wash I just got my I phone because of the contract My phone contract was £22 a month and a new phone every 2-3 years I got the same deal but no new phone for £11 a month so that I can have a very nice Megger 1553 that allows me to do my job professionally . Remember its all about self discapline if you want to make a living out of this your priorities are towards the business yes its nice to have gadgets but an I phone wont give you a Ze reading anytime soon
 
that is funny people say they have no money to buy things. but they have a new iphone with a contact for 30 to 60 pounds a mouth

I have an iPhone yes, but I also have a baby boy who came a long unexpectedly just as I brought it and I pay 28 quid a month. Don't understand why your chipping in with negativity at least the other advice was constructive.
 
ebay's a good place to look, just don't get carried away with the bidding, there will always be another one along :D

Picked up a 61557 for £75 without leads, waited a couple of weeks and a new set of Metrel leads for £25

Cheers robot although I'm winning a megger at the moment fingers crossed
 
mine's only 50p/month ..

4500x.jpg
 
that is funny people say they have no money to buy things. but they have a new iphone with a contact for 30 to 60 pounds a mouth

I have an iPhone yes, but I also have a baby boy who came a long unexpectedly just as I brought it and I pay 28 quid a month. Don't understand why your chipping in with negativity at least the other advice was constructive.

Robbalaar86 don't take it personally but in my view you say you want a tester but don't have much money yet as I have said countless times on this forum if you want to be good at what you do you need to be professional and discaplined and its down to priorities yes by all means get a Socket & See led indicator tester then when you have a problem and don't think you will get much help if you say red or green instead of a Zs of ?.?? ohms.

Now yes we all no doubt would like a nice I Phone,I Tablet, Top of the range car,Holidays abroad but remember its the tools in the bag and the tester in the box that pays for all of it but if you go cheap then is it any wonder if you have problems
 
Come on guys he was asking our advice on test gear so he is looking at things the right way. Whether or not he's got an iphone/ipad/iron is neither here nor there
 
Robbalaar86 don't take it personally but in my view you say you want a tester but don't have much money yet as I have said countless times on this forum if you want to be good at what you do you need to be professional and discaplined and its down to priorities yes by all means get a Socket & See led indicator tester then when you have a problem and don't think you will get much help if you say red or green instead of a Zs of ?.?? ohms.

Now yes we all no doubt would like a nice I Phone,I Tablet, Top of the range car,Holidays abroad but remember its the tools in the bag and the tester in the box that pays for all of it but if you go cheap then is it any wonder if you have problems

I appreciate that old timer thing is you have it easy then it changes now I'm not having it so easy and wish I'd never entered into a contract for my phone however the rest of my money goes on rent council tax and my little boy so I am a little tight and don't have that much to throw around we all make mistakes. The thread was to ask you older guys your advice on testers not financial advice on my personal wealth. I appreciate constructive advice.
 
so buy that 1552 for £250. it will do all you want and you can't buy a better MFT.
 
if you need a tester but dont have much money spare then kewtech kt61 or robin 1620, you can get second hand on ebay for less than £100. calibration will cost you 50 quid and you will have a reliable tester that does the job.
 
I appreciate that old timer thing is you have it easy then it changes now I'm not having it so easy and wish I'd never entered into a contract for my phone however the rest of my money goes on rent council tax and my little boy so I am a little tight and don't have that much to throw around we all make mistakes. The thread was to ask you older guys your advice on testers not financial advice on my personal wealth. I appreciate constructive advice.

As I say its not personal and I wish you all the best plus I would say the same and have done in the past not because I get off on it but if I am to help and contribute on this forum then I look for basic standards don't get me wrong you don't have to live and breathe electrics but if you are to progress you need to apply yourself when you are doing it and the better and more confident you get the better you will get on especially for your wee boy.
 

Reply to socket and see part p kit in the Electrical Tools and Products area at ElectriciansForums.net

Similar Threads

Hi all, New to the forum. I have been asked to look at this for one of our guys who's had an issue onsite after some electrical works had been...
Replies
4
Views
857
Hi all, Just a quick one regarding the need for RCD protection for socket outlets rated up to and including 32A. I have been tasked to install...
Replies
17
Views
2K
Hi All, This might be a bit of an odd question, I would really appreciate your thoughts. I am trying to up-date my mum's home, before putting it...
Replies
9
Views
2K
Hi all, Got an awkward bathroom fan installation in a downstairs flat, concrete ceilings and (some) walls. Bathroom is already fully tiled and...
Replies
1
Views
653
  • Article
Electrical2Go - Save Time Installing Cables with Super Rod At Electrical2Go, we're constantly striving to bring you the latest and most...
Replies
0
Views
544

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock