Steel conduit

[Corbs]

quick question does steel conduit need bonding at the start and finish of the run, because i have a job coming off soon replacing some metal twin fan extract units to plastic inline fans, at the moment the conduit it attached to the fan and the fan is earthed via a separate cpc in the conduit, the conduit is bonded at the controller side (start and metal controller unit box) now my question is do i have to bond the end (finish of the run).

Many Thanks
shaun

any question please ask

 

[Plonker 3]

Test it too find out if it's extraneous or not.

 

[D Skelton]

It doesn't need bonding no. It may need something else though... ;-)

 

[GMES]

It doesn't need bonding no. It may need something else though... ;-)

Damian you tease!!

 

[Silly Sausage]

Pull out the CPC and use it on it another job.

 

[Corbs]

Pull out the CPC and use it on it another job.

cant lol earthing the duct with it as the duct wont be earth now

 

[Corbs]

It doesn't need bonding no. It may need something else though... ;-)

i might be having a brain fart atm and the cider doesnt help any clues ?

 

[D Skelton]

cant lol earthing the duct with it as the duct wont be earth now

You don't need to earth the duct. You may need to do something else to it though... ;-)

i might be having a brain fart atm and the cider doesnt help any clues ?

Read both of my replies. See if you can figure it out...

 

[Plonker 3]

Here's a clue, apart from carrying the cables what else is the conduit installed for?

 

[ipf]

Here's a clue, apart from carrying the cables what else is the conduit installed for?

Pull ups ?

 

[Corbs]

Here's a clue, apart from carrying the cables what else is the conduit installed for?

protection and earthing

 

[Corbs]

Pull ups ?

if its clipped right yes

 

[R G]

Theres that old song ... continuity,,,,

 

[Plonker 3]

protection and earthing

so the conduit will need ********

 

[ipf]

so the conduit will need ********

Saddling ?

 

[Corbs]

so the conduit will need ********

earthing

 

[Corbs]

Saddling ?

maybe lubing up

 

[Plonker 3]

Saddling ?

Its not a horse silly.

 

[D Skelton]

earthing

And the duct may need.....?

 

[GMES]

And the duct may need.....?

Ducting!!

 

[ipf]

Its not a horse silly.

Buck off, you!!!

 

[telectrix]

to put you out your misery, it doesn't need bonding, it needs bending. use a hilmor. strangely enough there's 1 on the local rag for sale. £50.

 

[Corbs]

Ducting!!

or cleaning

 

[Plonker 3]

to put you out your misery, it doesn't need bonding, it needs bending.

You calling the OP a bender?

 

[Corbs]

to put you out your misery, it doesn't need bonding, it needs bending.

left,right, obtuse or all and you cant beat a bit of banter or word association

 

[Corbs]

to put you out your misery, it doesn't need bonding, it needs bending. use a hilmor. strangely enough there's 1 on the local rag for sale. £50.

yours and already have a 2" hydro bender and a hilmor so dont need another one

 

[GMES]

And the duct may need.....?

Ducting!!

 

[telectrix]

duct tape?

 

[Corbs]

duct tape?

close we dont use gaffa tape anymore well if we can help it normally dry tight fit or its a compound like threading paste

 

[Engineer54]

Jesus, god help this industry in the UK!!

 

[GMES]

Jesus, god help this industry in the UK!!

Morning Sir How are we on this fine sunday!

 

[Guest77]

Morning Sir How are we on this fine sunday!

Morning Glenn, Hows the hangover today?

 

[GMES]

Morning Glenn, Hows the hangover today?

Hi Mike, not got one pal, I was in bed for just gone 11 o'clock, then up at 6am out with jack from 6.30-8.30 back home, bit of cereal then got a callout at 10am. Just cracked a can open as we speak!!

 

[Guest77]

I wasn't drinking either, but went to bed this morning at 1-45 and was up again at 6 to let the dog out lol, I feel like death warmed up today, Just watching porridge on the TV and have the laptop on my lap at the same time trying to wake myself up a bit.

 

[GMES]

I wasn't drinking either, but went to bed this morning at 1-45 and was up again at 6 to let the dog out lol, I feel like death warmed up today, Just watching porridge on the TV and have the laptop on my lap at the same time trying to wake myself up a bit.

Hey congrats on the post count pal, over the 6000, is there a club for that!

 

[Guest77]

Hey congrats on the post count pal, over the 6000, is there a club for that!

Yes, removal from the site lol

 

[GMES]

Yes, removal from the site lol

Don't start that again lol

 

[GMES]

I thought admin might have granted me access to the 3000 club by now with me nearly being halfway there, and also being a valued and respected member of the site :sifone:

 

[Richard Burns]

I thought admin might have granted me access to the 3000 club by now with me nearly being halfway there, and also being a valued and respected member of the site :sifone:

Sorry, who are you again?
Have you been here long?

 

[Knobhead]

Jesus, god help this industry in the UK!!

I gave up.

You lot will have to find someone else for divine inspiration.

 

[telectrix]

i'll ask me faither.

 

[GMES]

i'll ask me faither.

View attachment 25154

Tel are you trying to tell us that Tony is your Dad??

 

[telectrix]

a medical impossibility, as i'm older than tony.

 

[Spoon]

I thought admin might have granted me access to the 3000 club by now with me nearly being halfway there, and also being a valued and respected member of the site :sifone:

I thought you had to have 3000 posts to join that club... or it is like a prison sentence where they halve it for good behaviour?

 

[Knobhead]

I thought admin might have granted me access to the 3000 club by now with me nearly being halfway there, and also being a valued and respected member of the site :sifone:

We’ve got one Glenn in there (part time) that’s enough thank you.

Add to which we’ll have to find someone else to talk about.

 

[D Skelton]

Definitely some funny stuff in the 3000+ club! It is inevitable though that one day, all those we talk about now will join and be able to see some of the things that we've said about them :S

 

[shanky887614]

Definitely some funny stuff in the 3000+ club! It is inevitable though that one day, all those we talk about now will join and be able to see some of the things that we've said about them :S

not all though, I havent seen cockburn in a while so doubt he will see lol

 

[D Skelton]

not all though, I havent seen cockburn in a while so doubt he will see lol

You're not far off I see! I think there's only one thread about you in there to be fair. Nothing too bad was said

 

[shanky887614]

You're not far off I see! I think there's only one thread about you in there to be fair. Nothing too bad was said

hey im only 800 off lol

 

[Knobhead]

It’s the only place most of my threads end up being locked!

It lay dormant for about three months until Geordie opened the door. The snooker table and bar had been nicked by the mods. We’re reduced to sitting on upturned beer crates.

Still think we should make Mr Cockburn an honouree member. He could do a comedy act every couple of months.


BTW what happened to the OP? Anyone seen him?