Discuss Tips on how to remove the Clear Light Diffuse suspended ceiling Florescent light fitt in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

M

mratclemo

Hi,
I need tips or links on how to remove the Clear Prismatic Light Diffuse from suspended ceiling Florescent light fittings the size is 595 x 595, I am unable to lift the units and remove from the side due to a new air duct installed directly above all 4 fittings which are in a Hallway about 3 years ago by a local firm that has since gone bust.

I am trying to avoid breaking the Diffuser and the cost of getting new lights installed, the unit will lift up about an 1/2 inch.



many thanks
 
Re: Tips on how to remove the Clear Light Diffuse suspended ceiling Florescent light

Their is a knack to them but their flexibility can reduce if many yrs old, explain the situe to the customer and get some new diffusers, they aint that expensive and any get broken at least you have spares.... your next problem is getting the new ones in ;)..
 
Re: Tips on how to remove the Clear Light Diffuse suspended ceiling Florescent light

Thanks for reply, No unfortunately cant lift unit and remove tried first but just not enough room.
I can lift the adjacent tiles but cant lift the unit high enough.
 
Re: Tips on how to remove the Clear Light Diffuse suspended ceiling Florescent light

yes they are about 15 years old and very brittle.
 
Re: Tips on how to remove the Clear Light Diffuse suspended ceiling Florescent light

push two adjacent corners up until they reach the backbox, this will lift and bend the sheet at one end and pull back the resting end enough so it can be eased down out of the fitting, like I said before it depends how old the difuser is and a bit of experience helps get the knack too... they were design to be taken out and fitted without the need to lift the fitting.
 
Re: Tips on how to remove the Clear Light Diffuse suspended ceiling Florescent light

It's doubtful that you will get them out without cracking or splintering them, but new one's are dirt cheap and will be more flexible so should be easier to fit back after the tube/starter change.The new Led panels are much thinner less than a inch thick and would easily fit in the space and after 15 years it's not unreasonable to upgrade but it all depends on the situation and costs.
 

Reply to Tips on how to remove the Clear Light Diffuse suspended ceiling Florescent light fitt in the Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock