Where to buy linking leads

[zakjay]

Does anyone know where I can get these? short lead with a croc clip on both ends

 

[Deleted member 105166]

Test Meter - one of the forum sponsors would be a good starting place.

 

[Jim_e_Jib]

Try one of the forum sponsors:

Kewtech Jumper Link Leads For Insulation R1 & R2 Testing Distribution Boards (JUMPLD1)

Opt for Kewtech JUMPLD1, jumper link leads for insulation R1 & R2 testing in distribution boards. Simplify your testing process with these reliable and compatible leads.

www.electrical2go.co.uk

 

[bill01803]

There is lots on ebay but they are a bit thin. I make my own

 

[Devonchris]

Some here, only 2.5amp, but may suit your needs? Cheap enough, even if you just use the clips and rewire them.

Electrical Test & Measuring Equipment | Cricklewood Electronics

Visit Cricklewood Electronics for Professional CCTV Systems that give full security to the homeowner. We offer high quality Home Security CCTV Systems.

www.cricklewoodelectronics.com

 

[DPG]

Didn't know Cricklewood electronics were still going - used to get their printed catalogue every year back in the late 1980s!

As above, be careful ordering the cheaper croc clip leads as they are not suitable for mains use. If in doubt make your own using either test meter flex or silicon high-flexibility test lead cable.

 

[Simon47]

Or for more flexibility, buy a couple of test meter leads (4mm plug on each end, ideally of the stackable style) and either use the croc clips from your MFT kit, or buy some extra clips.

 

[zakjay]

that's a good idea, thanks for all your suggestions, appreciate it!

 

[Snailspark]

Search r1&r2 leads when you look for them

 

[zakjay]

okay will do thanks for the tip

 

[buzzlightyear]

I have a spare car jump leads i use for
Doing R1& R2 ,lol .
[automerge]1569538129[/automerge]
It was great when maplins where around made up some good stuff .