Working in live enclosures

[7029 dave]

HV gloves, over gloves, face visor, no probs.

 

[GMES]

Im sure there are many guys who've worked in live boards and enclosures ect, we've all done it to some extent. Im not inferring anyone is wrong or right. I was merely questioning the validity of doing so when we consider EAWR, namely the paragraph that Andy copied and pasted. Its a little bit of a grey area in terms of how close is close to live terminals. What we must also consider is the individual situation, i.e working in a TPN switchfuse with live incoming terminals could be very different to a domestic CU in terms of PFC PSSC ect. Also, manufactueres instructions stating boards or switches are suitable for drawing in cables whilst the board is live would be evidence of equipments suitability to do so.

I would suggest certainly some of the things on the thread that sparks have done have certainly contravened EAWR, i.e attaching mccb's onto a live busbar because the owner of the factory didnt want you to knock power off. My personal view is that there are very very few circumstances where it is unreasonable to isolate the supply hence this should be done to preserve someone's safety over inconvenience.

Industryspark that is where I have to disagree, there are not many factories that will allow you to shut down an entire place just to fit a moulded case circuit breaker.

 

[Carlosfandango]

Ha ha nut!

was that cambuslang you done your FICA? I done mine around nine years ago and there were was none of that going on. Would hedge my bets and say that no one out with the training and test centres would go to this extreme.

"Hang on lad's I'll get ma sheet oot!"

Yeah Cambuslang. Thing is they'll fail you if you don't put it up. Or at least not let you continue!!

 

[industryspark]

GMES

Totally agree, there probably aren't many factories that will allow you to shut down a DB to fit a new mccb, id question whether they were being reasonable though and whether they could claim that they were within the EAWR's should anything happen.

Regards

 

[GMES]

GMES

Totally agree, there probably aren't many factories that will allow you to shut down a DB to fit a new mccb, id question whether they were being reasonable though and whether they could claim that they were within the EAWR's should anything happen.

Regards

Are you self employed or with a firm!

 

[industryspark]

neither at the minute!

 

[Knobhead]

Now now Tony, play nicely. Im after thoughts on the matter, not wisecracks.

Wisecracks? It’s a statement of fact.

I wouldn’t employ you if you're afraid to connect in to a switch.

 

[shanky887614]

Wisecracks? It’s a statement of fact.

I wouldn’t employ you if you're afraid to connect in to a switch.

wisecracks ?

i only do this to people i dont like

 

[Simonslimline]

wisecracks ?

i only do this to people i dont like

Why is it that every image you post does not show up? Or is it just me that can't see it?

 

[trev]

I can't see em either, I think he's pasting as plain text instead of pasting the link