Discuss Working in live enclosures in the UK Electrical Forum area at ElectriciansForums.net
Industryspark that is where I have to disagree, there are not many factories that will allow you to shut down an entire place just to fit a moulded case circuit breaker.Im sure there are many guys who've worked in live boards and enclosures ect, we've all done it to some extent. Im not inferring anyone is wrong or right. I was merely questioning the validity of doing so when we consider EAWR, namely the paragraph that Andy copied and pasted. Its a little bit of a grey area in terms of how close is close to live terminals. What we must also consider is the individual situation, i.e working in a TPN switchfuse with live incoming terminals could be very different to a domestic CU in terms of PFC PSSC ect. Also, manufactueres instructions stating boards or switches are suitable for drawing in cables whilst the board is live would be evidence of equipments suitability to do so.
I would suggest certainly some of the things on the thread that sparks have done have certainly contravened EAWR, i.e attaching mccb's onto a live busbar because the owner of the factory didnt want you to knock power off. My personal view is that there are very very few circumstances where it is unreasonable to isolate the supply hence this should be done to preserve someone's safety over inconvenience.
Yeah Cambuslang. Thing is they'll fail you if you don't put it up. Or at least not let you continue!!Ha ha nut!
was that cambuslang you done your FICA? I done mine around nine years ago and there were was none of that going on. Would hedge my bets and say that no one out with the training and test centres would go to this extreme.
"Hang on lad's I'll get ma sheet oot!"
Are you self employed or with a firm!GMES
Totally agree, there probably aren't many factories that will allow you to shut down a DB to fit a new mccb, id question whether they were being reasonable though and whether they could claim that they were within the EAWR's should anything happen.
Regards
Now now Tony, play nicely. Im after thoughts on the matter, not wisecracks.
wisecracks ?Wisecracks? It’s a statement of fact.
I wouldn’t employ you if you're afraid to connect in to a switch.
wisecracks ?
i only do this to people i dont like
Reply to Working in live enclosures in the UK Electrical Forum area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.