rcbos

  1. B

    EICR IR testing on whole installation with circuits protected by RCBOs

    EICR IR testing whole installation with circuits protected by RCBOs... Say it's a single phase consumer unit, plain main switch no RCCBs, all circuits protected by RCBOs, Is this method acceptable?.... L+N to earth only. Main switch off (safe isolation), all breakers on. Temp link...
  2. kingeri

    100mA RCD on PME system

    I am going to a job this afternoon, new shower circuit. I noticed yesterday that the Wylex CU has a 100mA S-type RCD as the main switch and all the circuits are on 30mA RCBOs. PME system as far as I could tell (certainly not TT). Didn't give it much thought then, but was thinking about it...
  3. Andy C

    RCB or RCBO in a Distribution Board.

    I am getting back into the electrical game after a few years and wondered what peoples thoughts are on the above. I am happy installing fully RCD protected DBs or Split boards but the use of RCBOs I had never seen. What are the main reasons/advantages/disadvantages for using them? I know they...
  4. driverman

    61009-1 or 61009-2 RCBO's

    Afternoon guys, Just wondered what the difference is, if any between a 61009-1 RCBO and 61009-2 RCBO? Are the characteristics different for any reason for different applications? I noticed that 61009-2 came out 1995? Thanks
  5. Pat H

    Ebay Consumer unit (new) thoughts

    Looking to upgrade my onw CCU Looking at: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=162069397926#ht_687wt_1169 Gives me 12 usable ways after the 2 RCD spaces taken. Its metal so current. What do people think? Not used that brand before.
  6. T

    RCD Test on lighting circuit protected by RCBOs

    Hi everyone, still training so please bear with me. What is the correct way to carry out an RCD test on a lighting circuit protected by a BS61009 Type B RCBO? I've looked in the regs, OSG and all of my course material but still no actual definitive answer so thought I'd ask here. The reason...
  7. Leesparkykent

    Three phase TT install with distribution circuit and RCBOs

    I have an Install where a 16mm 4core has been installed previously. ATM the SWA is coiled up either end At the supply which is a barn converted in to an office for the homeowners business and plant room in new extension to the house. There is no PME available as over head, in the middle of no...
  8. J

    Using powerline homeplugs across separate circuits

    I have just bought an Innuos music server not realising it has no built in Wi-fi capability, but needs an ethernet wired connection to the router. This could be done only by placing it in the cupboard where the router lives, whereas I wanted to place it alongside my Naim streamer upstairs. So...
  9. J

    New DB loaded with RCBOs

    Could someone tell me how much you would charge for a 12way Wylex DB loaded with RCBOs as new customer has been charged £1900 which I think is a bit steep
  10. 123

    Consumer Unit Changes, options for Customers

    Hi all, does anyone have any fact sheets, flyers or the like for Customers...Explaining the benefits of an RCBO Board over a Dual RCD Board?
  11. J

    hager rcbo/ c/u

    Evening chaps think they will- but not really used much hager... will the attached pic of rcbo fit fine inside 3rd ammendment hager c/u (link below) Hager Design 10 Metal 20 Way Consumer Unit - 100A Main Switch (Amendment 3) VML120 - The Electrical Guys cheers guys
  12. LeeH

    Need a nice to work with CU

    Seeing the PV install is going to be starting soon I thought I'd treat my bungalow to a new CU and replace old 3036 one with an 8 way RCBO board. The only RCD's in the place are the plug top type I have on the extension leads. (Only been in here for a year) I haven't had any dealings with a...
  13. W

    Induction hobs on rcbos

    Hi there customer got intemittant tripping of rcd on new induction hob , got service engineer out under warranty got told by a john lewis engineer that induction hobs need to only be wired on their own rcd/rcbo and not with other circuits like on a split load board 'All induction hobs need to...
  14. D

    Removing MEM breakers

    Hi folks, Well today I attended another house to perform a bathroom upgrade. Upon visiting the mains board I noticed it was a MEM. Not ideal I thought as my previous experience taught me that RCBOs were not possible with these mcbs. I then noticed that a previous spark had fitted a hager RCBO...
  15. akwoody2

    Series E board

    Hello chaps, A little help please. I have an old GE/Sector series E board and I need a RCBO. Anyone know where I can get one? Thank
  16. D

    Main 100A switch tripping

    Visited a job today. Small shop. 'Lectrics are tripping out. Ok! Newly rewired due to the problem that still exists. New board 100A main switch. Not rcd. Board has 12 rcbos. Intermittent tripping. When it does trip it takes out main switch and ALL rcbos. Tncs system. Not widely experienced so...
  17. S

    Sports pavilion rcbos or rccb incommer

    Hello guys. I was asked to quote to replace a 3 phase db in a sports pavilion. All cables are twin and Earth in the wall. Because it's a building open to the public I decide to go with rcbos on every circuit, to give extra protection and discrimination so they don't lose everything if a fault...
  18. P

    S-type RCBOs

    Does anyone make S-type RCBOs? For discrimination you should use an S-type RCD to protect a sub-main feeding a CU with a normal 30mA RCD or RCBOs. This can be handled with a 100mA 100mSec S-type RCD. It would be convenient if this were combined with a type B or C 63 amp MCB. This is in a...
  19. A

    Any arguments against RCBOs?

    Hi, Just a hypothetical question, more of a homeowner than DIY subject. I'm kind of sorry that when our house was rewired in 2011 we didn't go for RCBOs instead of a dual RCD board, not only is the split of which circuits are on which side not ideal, but it would have saved the width of two...
  20. A

    Square D Quikline RCBOs

    I'm after a 6amp and 32amp rcbo that will fit in a Square D Quikline consumer unit. Does anyone know what replacement breakers fit these boards. I know Schneider took over square d but the acti9 range is Merlin Gerin rebranded.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock