Discuss 13 amp spur in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

Anytime I've replaced a burnt out spur for an immerser it's been a 20a dp switch that's fitted. Just for that reason of the spurs being too close to the kW rating.
 
It defines it as "The strength of an electric current in amperes".

Are we now going to have ten pages of semantics instead of answering the question?


 

Reply to 13 amp spur in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

Similar Threads

I have a 230 Volt single-phase circuit with a 100 Amp cutout fuse and a 100 Amp MCB switch, so the supply is rated at 23 kVA. Only about 13% of...
Replies
54
Views
6K
G
Hi, (new to forum, first thread) Trying to get my head round voltage drop and using the calcs in practice. I have radial circuit - 16 amp MCB on...
Replies
3
Views
2K
Gloster Boy
G
N
I am trying to find out why an air master tiger 14/60 turbo air compressor keeps blowing the 13amp fuse. MCB does not trip when this happens...
Replies
18
Views
36K
Bobeto
B

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock