a Fused Digital Timer Spur switch

[Lwols]

Hi all,

(Just reposting, there was some confusion, I was mistaken for a domestic electrician, I'd like to think I have basic understanding, but I'll stick to carpentry!)

There were some great replied on the original thread, but I thought id post again, with the info I posted, you never know who may find it useful one day.

Original first post by myself;

Would somebody draw a diagram of how they believe a Fused Digital Timer Spur switch should be installed.

A bit of information;

There are 6 floor standing outdoor LEDs.
1.5mm SWA feeding each and routed back to the consumer unit. Shall be protected by a 6amp Wylex RCBO.

Thanks in advance.

 

[Lwols]

Granted it's a shocking photo!
I've got an electrician coming to fit on Wednesday, but it's a sad state of affairs when you know nothing about the work a man is doing on your own property.

 

[Lwols]

I've bought 3 core.

I've also bought a junction box so the 1.5mm can be terminated into that.

I would imagine he'll go with;

1.5mm flex into digital timer.
1.5mm flex from digital timer to junction box, connecting to the 3 core SWA feeding the outdoor lights?

Sound good?

 

[Marvo]

This is a request for info about a specific installation job. As a DIY'er you don't have the knowledge or equipment to perform the necessary tests to prove safety of any installed circuits. Please don't make any more new threads about this.