Dodgy trade pictures for your amusement! - 1 Million Views!

[sunray]

Finally, I've won!
View attachment 116399

I remember when there would be at least 6 screws; pairs each of wood screws, 4BA & M3.5

 

[sunray]

This was described as a new circuit to the shed, must be 10years ago, this is in one of those metal enclosures which originally had a built in fuse box at the top, it looked like the hole the cable goes throughwas drilled with a masonary bit.

 

[sunray]

This was mid 2020 so during lockdown.
Customer has been in the house for 2 months, survey highlighted several electrical issues including the CU in the garage being fed with T&E buried directly in the ground. Part of the sale conditions being that the garage feed was replaced. Garage CU contains 7 MCB's for: RFC for an uncounted number of sockets [>20], lighting, 2 sheds, greenhouse, hot tub and outdoor sockets/lighting. A total of 148A worth of OCD's but not a RCD in sight. I didn't actually check the size of this cable but I believe it to be 6mm², the other end is glanded to a plastic CU but no earth connection to the armour. The cable runs under 4 paving slabs where it appears just enough sand was scraped out of the way for it, all fully certified and notified to scheme provider.
Was reported to the 2 scheme providers and CHAS listed on his invoice.

 

[mainline]

View attachment 121088View attachment 121089
This was mid 2020 so during lockdown.
Customer has been in the house for 2 months, survey highlighted several electrical issues including the CU in the garage being fed with T&E buried directly in the ground. Part of the sale conditions being that the garage feed was replaced. Garage CU contains 7 MCB's for: RFC for an uncounted number of sockets [>20], lighting, 2 sheds, greenhouse, hot tub and outdoor sockets/lighting. A total of 148A worth of OCD's but not a RCD in sight. I didn't actually check the size of this cable but I believe it to be 6mm², the other end is glanded to a plastic CU but no earth connection to the armour. The cable runs under 4 paving slabs where it appears just enough sand was scraped out of the way for it, all fully certified and notified to scheme provider.
Was reported to the 2 scheme providers and CHAS listed on his invoice.

Looks to be the same engineer who did yours that did the ones I see on a daily basis.

 

[Mark42]

Just published on my local neighbourhood local forum as an example of quality work

 

[sunray]

Just published on my local neighbourhood local forum as an example of quality work

I'll guess this is for downlighters prior to being boarded under, at least the shoddy inaccessible JB's have been fixed to the joists

 

[mainline]

Just published on my local neighbourhood local forum as an example of quality work

Do you live in India.

 

[Mark42]

Do you live in India.

No.
I live in Norfolk.

 

[Fazz711]

As in normal for Norfolk LoL

 

[littlespark]

We met a couple from Norfolk when we were on a cruise a couple years ago... Joined up with them for the pub quizzes.

Our team name is usually "Little chance".... There's was "Norfolk an' chance"

 

[vjsmarwick]

How about this for a shower install ? Can’t see why it would be a bad idea !

 

[Mike Johnson]

Just published on my local neighbourhood local forum as an example of quality work

Anyone going to mention noggins.

 

[freddo]

From a EICR some years ago.

 

[UKMeterman]

Is this the correct way to use wire nuts? 8,7 M vues · 69 K réactions | Big Wire Nuts For Big Problems | Big Wire Nuts For Big Problems | By Trent Parker | Facebook - https://www.facebook.com/reel/1100826422057755

 

[littlespark]

Is this the correct way to use wire nuts? 8,7 M vues · 69 K réactions | Big Wire Nuts For Big Problems | Big Wire Nuts For Big Problems | By Trent Parker | Facebook - https://www.facebook.com/reel/1100826422057755

In the UK though, we would use the giant wagos…. Maybe, or maybe not, made from Lego.

 

[UKMeterman]

Well, I guess technically you're right... the fuse did overheat... things do tend to get hot when they... EXPLODE!!!
This was a very sudden failure (loud enough that the client heard it go from upstairs). I have seen first hand the result of an overheating fuse in a moulded plug... this ain't it

View attachment 119595

Good spot, but no... that's just a mucky spider's web

View attachment 119597

You might like

View: https://www.youtube.com/watch?v=KVJVswLbqaA

 

[bill01803]

Shower recently fitted by plumber and got his "electrician" to wire it up, supply is TT

 

[Simon47]

That's OK, he's used a crimp terminal, and it's that same make of breaker

 

[Brother Blue]

As far as the busbar connection goes MK make a retrofit kit to allow the newer breakers to fit in those boards.

The big issue is the rcd

 

[mainline]

As far as the busbar connection goes MK make a retrofit kit to allow the newer breakers to fit in those boards.

The big issue is the rcd

It’s ok when the plumbers mate did the testing it was tripping at 20 so he said jobs a good un.