- Feb 26, 2013
- 1,039
- 1,036
- 1,688
- 45
- If you're a qualified, trainee, or retired electrician - Which country is it that your work will be / is / was aimed at?
- United Kingdom
- What type of forum member are you?
- Practising Electrician (Qualified - Domestic or Commercial etc)
Hi all
Eicr being undertaken, what code if any would you consider for this scinario
Small bathroom in a flat, with airing cupboard inside, no room for immersion and pump spurs (looks like spurs was inside airing cupboard at one point but cupboard has been made smaller to enlarge bathroom and left the spurs on the outside of the airing cupboard
The spurs sit at about 530mm from shower screen, so in zone 2, its a solid glass panel on that side of the shower enclosure so not accessible from this side
The spurs have been boxed inside a cabinet with a standard hinged door
Would you insist the hinges are removed and it is fixed with screws/chrome caps like a panel(removal for use with a tool only)
It does have a 24hr time clock inside so it will-have to be accessed from time to time
Any thoughts greatly appreciated!
Eicr being undertaken, what code if any would you consider for this scinario
Small bathroom in a flat, with airing cupboard inside, no room for immersion and pump spurs (looks like spurs was inside airing cupboard at one point but cupboard has been made smaller to enlarge bathroom and left the spurs on the outside of the airing cupboard
The spurs sit at about 530mm from shower screen, so in zone 2, its a solid glass panel on that side of the shower enclosure so not accessible from this side
The spurs have been boxed inside a cabinet with a standard hinged door
Would you insist the hinges are removed and it is fixed with screws/chrome caps like a panel(removal for use with a tool only)
It does have a 24hr time clock inside so it will-have to be accessed from time to time
Any thoughts greatly appreciated!