LED GU10 bulbs still glowing when turned off

[Dannydigger]

Hi Guys,

Just need a little advice if possible.

I have recently fitted 6 GU10 Downlights 230V on a customers landing with 5W Cool LED GU10's. When he turns off his light one light is still slightly on. I know this has something to do with the two way switching for the landing and a bit of leakage but I have no idea of how to overcome the issue.

Can anyone help?

Thanks

Dan

 

[Leesparkykent]

http://www.maplin.co.uk/p/rc-contact-suppressor-rg22y

 

[Dannydigger]

http://www.maplin.co.uk/p/rc-contact-suppressor-rg22y

Brilliant thank you, jut one more question, how would I incorporate that into the circuit or switch?

 

[Leesparkykent]

Between switch line and neutral.

 

[Dannydigger]

Between switch line and neutral.

L1 & L2?

 

[Leesparkykent]

L1 & L2?

No switch line and neutral.

 

[Dannydigger]

No switch line and neutral.

Ah at the rose/junction box?

 

[Leesparkykent]

Just connect it between switch line and neutral...could be at the switch if fed or at the JB etc. If your not sure where switch line and neutral are you might have to get an electrician in

 

[Dannydigger]

Just connect it between switch line and neutral...could be at the switch if fed or at the JB etc. If your not sure where switch line and neutral are you might have to get an electrician in

Brilliant Lee, Thanks again buddy