It is because you don't have NVQ3 they can extract some money out of you every five years. I googled it below:
Why Take this Assessment?
If, through experience, previous training or independent learning you feel confident in your ability to pass a full scope competency assessment, then this assessment presents a training solution that will allow you to avoid the additional cost and time commitments of having to undergo training that you may not need.
Assessment and certification are covered by UKAS accreditation to ISO 17024.
This Assessment Covers (over 2 days)
The assessment has been designed for experienced contracting electricians who are familiar with BS7671:2008(2011), On-Site Guide, Guidance Notes 3 and the Memorandum of Guidance on the Electricity at Work Act 1989.
It will assess your competency under the following topics:
- Basic electrical knowledge (Ohm’s Law etc.)
- Electricity at Work Regulations 1989
- Part P of the Building Regulations
- BS 7671:2008(2011) & On-site guide
Working on approved model rigs, the candidate will also need to show competence in:
- Carrying out a periodic inspection on an existing 3 phase installation and correct
completion of a Electrical Installation Condition Report (EICR)
- Carrying out an initial inspection and test of a new domestic installation and correct
completion of an electrical installation certificate
- Carrying out an inspection and test of an addition to an existing circuit and correct
completion of a minor works certificate
Assessment runs over 2 days which may not be consecutive. Please check at time of booking (if more than 4 places booked, practical will take place on 3[SUP]rd[/SUP] day)
First 4 places booked will run on the 1st & 2nd day, last 4 places booked will be the 1st & 3rd day.
Assessment Structure
This two day assessment process will feature a half day online, open book, theory examination. This will be followed by a full day practical assessment for successful theory candidates.
Assessment Materials
On attendance of the assessment, you will need to bring the following:
• IET Requirements for Electrical Installations BS7671:2008 amd 1 (2011)
• Memorandum of Guidance on the Electricity at Work Regulations 1989, HSE (free download)
• IET Guidance Note 3
• IET Onsite Guide BS7671:2008 (2011)
• Your own test equipment and in date calibration certificate (we can provide test equipment if required)
Assessment Requirements
No prerequisites.
On Completion of the Assessment
On successful completion of this assessment, candidates will receive a Blueflame Certificate of Competence, approved by UKAS and valid for 5 years. This is one of a number of qualifications required for NAPIT's all electrical work scheme and therefore represents a step towards being able to self-notify under Part P of the Building Regulations.
Price
£240.00 + VAT.
