install

  1. M

    New kitchen install over existing wet underfloor heating

    Hi, I'm getting renovations done to my home, including an existing extension which already has wet underfloor heating. We are moving a kitchen to this area from another room and plan an island with induction hob. We've just been told that it wont be possible to fit a hob on the island without...
  2. O

    Advice on new home EV charge point install.

    Hi all, New ill ( not used yet) of 7.5kw EV charge point. New house consumer unit fitted 6months ago and fitted with 16mm tails as the main fuse was 80amp. Electric company then come to visit to see if the...
  3. B

    Troubleshooting Smart Switch Install

    Hello! I'm installing an Aqara smart light switch (with neutral) but nothing is powering on after getting everything wired up. I've attached pictures of the original switch (working) and the smart switch (not working). I've confirmed power was restored at the panel and voltage tester confirms...
  4. G

    Can LSF and grey household T&E be mixed together in a install

    As the question above states can I mix white LSF and standard grey domestic twin and earth together in a new installation. The property is a domestic property being rewired so wouldn’t be any need for the lsf I just have a few drums of 1.5mm on the van and thought of using them instead of...
  5. D

    Electrician didn't install CT clamp, what can I do?

    Hi all, In July I had a PodPoint Solo installed at my house. It was a secondhand unit from my father in law. I've just recently realised it's only be charging at 2kW and not at 7kW. I think this is because the CT clamp is not installed, is that right? Electrician hasn't installed a SWA cable...
  6. E

    Battery How to install additional 12V battery to run security systems

    Hello all, new here. I’m searching for advice whilst brainstorming the idea of installing an additional 12v battery in my car to supply the security systems. Some context, the car in question is infamous for being easy to pinch as it is easy to access the battery, disconnect it without setting...
  7. W

    What cert is best for a new spd install?

    Brand new spd installed new tails, saying minor works is ok, I don’t believe so as tails are coming from metering supply via Henley blocks
  8. S

    Install smart switch to radiator

    Ahead of the UK winter I plan to replace the fused switches connecting to the radiators with smart switches. The original fused switches look like this: When I source the smart switches, I find that I have options of: (A) Internal devices to be tucked inside the back box (such as below). I...
  9. P

    how can i fix this i know i need matching brakers what ones do i need and how do i install a gfci ?

  10. H

    How far from the house can I install a 7kw EV charger? Would 40m be possible?

    How far from the house can I install a 7kw EV charger? Would 40m be possible?
  11. L

    Do i need to install a DC isolator if theres already one provided on the hybrid inverter?

    Hi, I have nearly finished installing my first solar system for my brother in law. havent installed a DC isolator on the string lines (none in stock locally and didnt order ahead). The sofar inverter he bought has a rotary isolator fitted already. Can I label that isolator and be compliant...
  12. R

    Solar Help setting up Export/Feed-in tariff after PV install

    Hi all I had my PV/Battery setup installed in May and since then all my excess PV is just fed back to the grid for free. When I initially tried to get setup on Octopus Energy they came back with this: "To correctly measure your export we have to get something called an export MPAN generated...
  13. S

    Large electrical ufh install

    Hi all any advice welcome. Long story but at the last moment I have been asked to advise on the possibility of installing electric ufh in a large yoga room as bums are cold on the floor. Room is 90sqm but my thinking for easy install supplier does 12sqm mats so perimeter left out that is 2x...
  14. D

    Install LV Network Switch and Patch panel in outdoor non IP rated enclosure

    Grateful for a kick in the right direction on the following: a telecomms engineer stated out that an outdoor metal cabinet (earthed & bonded) was an unsuitable enclosure for a network switch and patch panel to be installed into, as it was not IP rated. As it happened, the size of the cabinet...
  15. V

    230v install into a caravan

    I've been given a really interesting job to do, and that's to retrofit a vintage caravan with 230v. Another company is doing the renovation work, I'm just tasked with the electrical work. Now, there's a lot in section 7 of BS7671 to do with caravans, but it is vague on the earthing. My...
  16. I

    Can I Install Subpanel From Here

    So I have this mess here in the picture. I have never seen a meter like this and don't know why the buss for spare breakers are before the the disconnect breaker. This is in a mobile home I just bought and the 2 breakers that someone put in, go to an outlet and the 30a 240v goes to a water...
  17. K

    Ideas on how to install SELV LED on wireless switch?

    Hi everyone I am going to install LED lightstrips in the garden which would be on the SELV and obviously it needs to be installed using stepping down transformer however the lights needs to be on wireless switch technology which would require another transformer to feed the stepdown...
  18. J

    Whole House Backup Generator Install

    Getting ready to install a 22KW Generac on my home and just had a question to clear up. I have 400A service running to two 200A main panels. I will be installing two 200A transfer switches, mainly because I had 1 already and the 400A is like $2900.00 vs $700.00 for another 200A one. I know that...
  19. P

    Separate meter install for EV charger?

    I am looking to install an EV home charger for one vehicle, but possibly two in the future. I have a second unused (but still active) mains supply cable from a time when we had electric heaters. Unfortunately the separate meter on this supply was removed a few years back. It would seem to be...
  20. S

    Swa install to hot tub

    Hi, looking for some advice, 6mm swa allready installed to a hot tub Client now wants additions and my calcs say the original swa is allready too small. 26a but its120m run, im advising 16mm 2core. However the swa installed is 4 core so was thinking of doubling cores together to save on time/...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Advert