loft

  1. S

    TV Antenna splitter in loft

    I want to replace an old aerial splitter box with a newer one. Labgear LDA2081LR Distribution Amplifier The old one looks to be powered by a cable connected to the lighting circuit. See photo The new labgear has a 3 pin plug on it. See photos of new splitter statistics and the old box...
  2. T

    Adding loft lighting

    I've added a junction box with 3 connection blocks to a lighting cable in the loft in order to add a spur for loft lighting. The cable I've broken into operates the landing light and other on the upstairs floor. I've followed 2 wiring diagrams, both of which have identical layouts, but I can't...
  3. A

    Wago Connectors for Damaged Cable in Loft

    Hi all - have discovered a damaged cable in the loft - seems to be from the 1st Floor Lights Ring Circuit. Have cut the cable and reconnected it with Wago Connectors - see pics (yes i have switched off electricity and tested the cable was dead before cutting). This particular cable has 4 cables...
  4. A

    Loft installation methods

    So new build bungalow is to have 300mm loft insulation as told by building control. This means installation method 101 comes into place however as it's a bungalow all circuits including cooker ring mains etc will be installed this way as they come from the loft space down. This installation...
  5. A

    Loft insulation and ratings

    Hi guys New build small 2 bed bungalow to have 300mm of insulation in loft space. Obviously all circuits to be ran in loft and dropped. Circuits to be used are alarm circuit 6amp, lighting 25x 4w downlights 6amp, 2 x 32amp ring mains, 16amp boiler radial, 32 amp hob/oven circuit (undecided if...
  6. KeenPensioner

    Dropping cables from loft

    Hi, I'm retired, but have worked as an electricians mate off and on - I know my limitations. I've been asked by a friend to fit a "picture light". The wall is plasterboard cavity with insulation, the wall has a 3 inch coving. I have access to the loft above and there is a single pendant in the...
  7. J

    Supply loft light from unused shower cable

    I was asked a question today if it would be possible to use an existing cable that was previously installed to supply a shower which has been taken out (6mm T+E) to feed a light in the loft. Initially I said no it wasn’t good practice to do this, but now I’m thinking as-long as the MCB is...
  8. haptism

    Asbestos in loft, is it common

    Anyone know if that ancient green coloured itchy scratchy loft insulation that is rolled out (similarish to the modern yellow coloured rockwall), ever contain asbestos ? I know that loosefill is a particularly nasty form of asbestos, but in relation to the old green rolled out stuff in lofts...
  9. B

    Joint box in loft or back to switch

    Anyone got any pictures of jobs they’ve done using a joint box in loft instead of taking all cables back to your switch position? Eg Spots, Fan, Mirror as our next job has all wall paper on walls so may be a better option just curious to see what it’s like.
  10. Matt

    Strange "pellets" in the loft.

    Hey, I am very new to the trade and I was helping a mate on a house rewire the other day and I found something that intrigued me. When I went up into the loft I found loads if these: Does anybody know what these are? the loft floor is littered with loads of them. The house is really old, if...
  11. M

    Wiring loft conversion

    Hi I'm new here need to know what clips and trunking do i need for 25mm tails of 10 metres long thanks
  12. G

    Loft conversion wiring

    Hi there I’m working on a loft conversion, just adding two small bedrooms in existing space. Would it be ok adding a radial circuit off a 16 amp MCB ? And how many sockets could I have? Thanks
  13. T

    Loft light conundrum

    Hello, I am having issues getting my head around this. So, I want to install a single ceiling light and switch in the loft. The loft access is in the middle of the upstairs landing. There is already downlights across the whole of upstairs landing. Therefore there are T&E cables up in...
  14. J

    Screwed into cable in loft

    Hi i put a screw through the lv mains cable in loft got a little flash cable got warm then cooled what should I do from here? Thanks in advance
  15. rolyberkin

    Fault on lighting circuit - What am I missing?

    I had a 10 minute look at an existing fault yesterday as walking out of a customers house as it was way past beer o'clock, the circuit is from a dual RCD board. Serves lighting in a loft conversion with balcony (outside lights) en suit, downlights shaver socket, bathroom fan and central pendant...
  16. G

    Live wire taped off in the loft.

    Afternoon all, new on here and hoping someone maybe able to offer a bit of advice? I am flooring the loft at the moment in the loft, and there is a length of wire (grey 3 core) that has just been taped off and taped to the rafters. The wire is live (240v) but isolating the MCB for upstairs...
  17. G

    Loft conversion sub main & diversity

    Hi all, I am currently having a loft conversion completed and want to put in its own board in the loft. The main reason for this is if in the future, I want to let it out as a self contained unit, it will be much easier. The conversion will initially have a ring main 32 amp and a lighting...
  18. J

    12v DC power from lighting circuit in loft space

    Hi, I've very little experience with wiring (other than a 18 yr old physics A-level), so was looking for a few pointers. I have a 4G LTE router I'd like to run in our loft, as it has far better reception up there - but alas, there are no plug sockets. The lighting circuit is accessible - but...
  19. E

    Loft Sockets added to spur( FCU)

    Hi there looking to fit 4 double sockets in a loft , there are no existing sockets wired from the loft so it will require a cable to be rsn into the loft , im wondering if i spur off a socket can i then connect the 4 new sockets in a radial from the spur assuming the original socket circuit is a...
  20. sythai

    Thatch loft - rewire

    Hi All Just curious to see if anyone has had the pleasure of carrying one of these out before? And if so how it went. We've got couple coming up, both following an EICR where we've found chewed cables/ basic insulation-exposed terminals buried in the thatch :rat::fire::flushed: Both jobs...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock