I am trying to find other people adversely affected by the failure of Royal Mail's Special Delivery "service" to deliver a FIT application to EDF prior to the 3 March 2012 deadline. I would appreciate hearing from any one in this position.
Morning,
I've got a job on what was once a dairy farm, it hasn't been used as such for many years, it has a 3ph supply to the house from which the single pahse db in the house is fed with a 3ph supply going out to the old barns and milking parlour.
It appears that the earthing arrangement for...
Hi Guys and Gals.
Have been passed some 16th edition minor certs for an installation in feb 2008. 2 of these are for installs in a kitchen. one for the cooker and one for sockets.
Question 1. Was a Minor adequate for a special location in the 16th?
Question 2. What was the requirement for...
Tinyotall
Thread
circuit
edition
electrical work
kitchen
location
paperwork
sockets
special
Found while doing an EICR today - see picture.
OK- its just outside Zone 1 by a few mm, but the storage rad circuits are not RCD protected and there's no supplementary bonding in the bathroom.
I disconnected it, then got told "it doesn't work anyway" ..... I guess it got wet!
However, worse...
EastAnglian
Thread
always
bathroom
installation
location
permission
specialspecial location
without
Hi all,
I've just had a really bizarre phone conversation with a potential customer, who wants a quote doing for a rewire (or partial in phases) in a house. The bizarre bit is the fact that he's wanting to use some system where all the switches etc are wired in Cat5, then wired back to some...
Need a little advice please guys!
My wife is a dog groomer and she wants me to set up our 8ft x 8ft wooden shed as a grooming salon. That's ok but she also wants to be able to be able to 'bath' the dogs in there as well, using a 'booster bath'.
She says she would also needs some sockets, which...
If we satisfy all the usual criteria of a special use circuit like labelling, protection etc, can we install foreign socket outlets in UK domestics by special request for equipment sourced from abroad, rather than chopping plugs off?
I've posted this here rather than the main forum as wouldn't...
Passed my assessment with elecsa yesterday, assessor chris thomas put my nerves at ease stright away very helpful fella. For those who want to know it went like this, firstly spoke about what experience i had then went through all my paperwork, required a healthy and safety policy and risk...
Kelrich
Thread
certification
checked
elecsa
learning
paperwork
passed
questions
special
yesterday
Hi all i was just wondering if anyone knew if petrol stations were all on a tt earth system as i went to look at a couple in towns today and both said at the eart met bar tt sytem also at the main cut out fuses although did not look like an overhead system and in densely populated towns. I was...
Have I got this right?; If adding a couple of lighting points to an exisiting circuit and the fuse board contains rewireable fuses, I need to provide RCD protection because of the addition (cables not more than 50mm deep). New CU or seperate RCD unit for that circuit? Just trying clear...
pencilpusher
Thread
cables
circuit
lighting
lighting circuit
location
special
Can anyone tell me if there is a reg for fitting a fused spur in a toilet cubicle for a saniflow pumped toilet ?
i.e is the minimum distance going to be 300mm ?
ive been pondering if a utility room with a sink & toilet come under the requirements of a special location ,surely it does ?? i just wonder why part 7 of regs doesnt mention anything about risk of shock near water for somewhere like a utility room containing a sink.
Just wondered if anyone had...
Hello,
I currently fit CCTV and I'm looking for a course in the birmingham area ideally in the evening or weekend were I can learn to legally fit a fused spur to conform with Part P reg's looking on line it looks like I have to pass power wiring level C if someone can confirm if this is right...
m1ke
Thread
circuit
fitting
fuse
fused
fused spur
issue
part
part p
registered
scheme
special
spur
Hi gang
has anyone vere tested a lab, my boss has just asked me to find out if there are any special requirements.
is it classed as a special location, hazardous area etc, i'm told its wired in pyro and has flameproof fittings etc.
any help would be appreciated.
thanks
Hi All,
I have a client who wishes to install an waterproof tv in his bathroom, the position would be in zone 1/2 , as far as the current regs go I believe this to be an area for SELV circuits alone. Anybody got any other information to this ?
Thanks
Dusty
Not having used the dreaded Part P for a while I always took the Special location as from the Part P document 2006 as the following,
"Locations containing a barh tub, or shower basin, swimming pools or paddling pools, hot air saunas"
Which for me meant the whole room. I was speaking to a...
Hi there,
I have been asked to change out single socket outlets for doubles and add another few sockets.
What do i need to do in regards to paperwork for the customer.
I'm a bit rusty on this as not done any installations for over a year now and just getting back on the job.
Any information...
s.banksplumheat
Thread
changing
circuit
installation
issue
single
socket
sockets
special
anyone tell me where in BS7671 it says what touch voltage is allowed for which special location - looked in individual special locations but can't see any mention :confused:
cheers.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc