Dodgy trade pictures for your amusement! - 1 Million Views!

[Darkwood]

Right ... Just been nudged to set this up by Paul.M and sounds a good idea following recent threads I've done in the Arms..

Rules....No Offensive material... edit if required before posting as this is the public arena.
Anything to do with the trade or in and around it ...H&S pic's welcome.



I've posted this a few times and this is at a mates house following a kitchen refirb several yrs ago. mg_smile:

 

[uksparks]

That's great that is!

 

[Paul.M]

That was the fastest Sticky Thread in history! This should be fun for all of us. (ps I like your rules DW)


This is a house I was working on today, came across this. One word describes it,,,,,, FAIL



Just after taking that I knock a full box of washers and screws behind the cooker and had to pull it out to get them. Needed them or would not have bothered.

Great thread, post them pictures up lads.

 

[shanky887614]

this had been arcing for a while in a pub, couldnt have that i shuffled some circuits around to get the pumps back on in the pub.

wouldnt bother me, ill drink ale,bitter,lager or cider

 

[GMES]

Not electrical but still made me chuckle this was a builders handy work who was doing a few jobs while I was doing some electrical jobs,
Spot the mistake!!

 

[Leesparkykent]

I've posted this up before under the thread title " This really put the plumb in plumber ".

This is a gas pipe BTW.

 

[Darkwood]

Pull up to close

 

[shanky887614]

Not electrical but still made me chuckle this was a builders handy work who was doing a few jobs while I was doing some electrical jobs,
Spot the mistake!!

door handle wrong way around
someone annoyed there neighbor XD

 

[Paul.M]

Nope..... That is not how you feed power to the garage mate.



Posted this up ages ago but it still make me chuckle.

 

[Leesparkykent]

Another quality DB, also there has been a mini fire and a bit of vir chucked in for good measure lol.

 

[Resu]

Temporary power, installed by the builder!

 

[Darkwood]

https://www.facebook.com/video.php?v=1399602136753639&fref=nf

Wait until he plugs his hair dryer in

 

[shanky887614]

https://www.facebook.com/video.php?v=1399602136753639&fref=nf

Wait until he plugs his hair dryer in

ive seen that one before lol

 

[a1guvner]

A Containment catastrophe

Apologies for the orientation

 

[Paul.M]

What the hell did they use to hold it up in the first place? Bluetack


(sorted out the pics for you btw Guv)

 

[a1guvner]

What the hell did they use to hold it up in the first place? Bluetack


(sorted out the pics for you btw Guv)

Had their rep come down to sell their wares and all looked good but the product codes were wrong with what they demonstrated. they stated one code was rated at 40k per fixing when it was actually 20k. the fixing had a part that clips through unistrut (now known as the weak link) under load it just pulled through and once one had gone there was no stopping the rest running away. The 40k version actually just omits the unistrut clip and the wire is just sleeved and looped through a hole.

 

[Paul.M]

Had their rep come down to sell their wares and all looked good but the product codes were wrong with what they demonstrated. they stated one code was rated at 40k per fixing when it was actually 20k. the fixing had a part that clips through unistrut (now known as the weak link) under load it just pulled through and once one had gone there was no stopping the rest running away. The 40k version actually just omits the unistrut clip and the wire is just sleeved and looped through a hole.

It is not even carrying that much weight by the looks of it. A lot more cables to be installed going by the amount of basket and tray. Thank god it happened when it was still a building site and not a functional building!

 

[a1guvner]

It is not even carrying that much weight by the looks of it. A lot more cables to be installed going by the amount of basket and tray. Thank god it happened when it was still a building site and not a functional building!

Definitely, imagine if it was fully loaded, it was only having a suspended ceiling below it and that was the main exit route with a lot of foot traffic planned and it came down on them, Big claims#!!!!!!!!

 

[Paul.M]

That could have turned out to be the biggest cause of electrical death whilst exiting a building the UK has ever seen. Hope that company gets their nuts and bolts sorted out for the next project.

 

[Darkwood]

This is what happens when a welder doesn't have his return clamped properly and the 400amps uses the turn table supply earth to return on.... note how its burnt out in its twisted core design.



This is why welding is a massive danger to the integrity of the buildings circuit and equipotential bonding... it can destroy the earth to many circuits leaving them live and exposed in some cases. Many a death has been attributed to poor welding set-ups of the years.

 

[Kamikaze]

Poor man’s chandelier

 

[shanky887614]

Had their rep come down to sell their wares and all looked good but the product codes were wrong with what they demonstrated. they stated one code was rated at 40k per fixing when it was actually 20k. the fixing had a part that clips through unistrut (now known as the weak link) under load it just pulled through and once one had gone there was no stopping the rest running away. The 40k version actually just omits the unistrut clip and the wire is just sleeved and looped through a hole.

what type of fixing was it?

usually for us its raw bolted unistrut to ceiling then everything else hangs off that

 

[Geordie Spark]

What the hell did they use to hold it up in the first place? Bluetack


(sorted out the pics for you btw Guv)

Whatever they used it certainly wasn't Gaffer Tape !! :laugh:

 

[Geordie Spark]

what type of fixing was it?

usually for us its raw bolted unistrut to ceiling then everything else hangs off that

Ah!... That'll be the undercooked variety of fixing.

 

[shanky887614]

Whatever they used it certainly wasn't Gaffer Tape !! [emoji23]

 

[a1guvner]

It was a product called zipclip. Basically you still a 6mm hole, then you have an eye bolt basically that you just bang in which none had failed then the wire comes off that

 

[Anthony King]

Yes that is a coke can lid being used as a jb.

Always amuses me when we find things like this

I have more ill dig them out

 

[Kamikaze]

A BS 5194-4 fuse!:biggrin:

 

[chrisclose]

Post #21 is one of the best things I think I've ever came across... anywhere!

 

[GB.Kayak]

Poor man’s chandelier

I like this ... but I like the coke can junction box better!

 

[Kamikaze]

This is in a special needs school. Screwing a MCCB panel back to a wall is overkill anyway, so they just chucked it into a false ceiling void and spread the load across some battens. It’s still juiced up and been like that for over 20 years.

 

[Kamikaze]

At a secondary school, this is a MCB which has been siliconed onto the side of a dimmer unit enclosure. I spotted this within a month of the dimmer unit going in but all of a sudden everyone involved, from contractor to site service manager to governors suddenly turned into the three wise monkeys. They didn’t feel too clever though when the application for the entertainments licence was turned down because of it, and they had to cancel the show for which all the tickets had already been sold.

 

[Darkwood]

Some great pics Kamikaze ...just hoping these are not your back catalogue in disguise

 

[pennychew]

I love 'tips and tricks' threads like this!

 

[Anthony King]

The first two are from when i used to follow plumbers around, good little earner that was.

The third one, well i just like the pipework

 

[Anthony King]

 

[Anthony King]

Another skilfully completed job (in the eyes of a plumber)

Oh i forgot to add, hope that fuse never needs changing, or the spur inspecting in an eicr. (Just to clarify, i did move the spur and all associated wiring, and all the temp connections were already made when i arrived, because he wanted it tested so he could wrap up) i just laughed, then politely asked him to remove the boiler so i could access the spur.

 

[amlu]

that was left after builder crew doing new kitchen and downstairs work.
they had someone for new kitchen, and told the customer she needs another spark for big rewiring.
in the meanwhile reconnected it with some new cable,
fair choice from them and some work for me

 

[vernam616]

Saw this the other day in a rented house, how can people actually carry out work like this?

 

[pennychew]

Saw this the other day in a rented house, how can people actually carry out work like this?View attachment 28572

Crooked taps are my pet hate as well mate