Dodgy trade pictures for your amusement! - 1 Million Views!

[HandySparks]

The double had a 1.5 out the back feeding the programmer.

I wonder if it was done like that to make it easy to run the heating off a generator using a longer widow maker cable?

 

[muzza1]

Even Mrs.M PHSL :rofl:

I love the earthing arrangement, "Screw in grout" technique!!!!! Reminds me of a hotel we stayed at in Malta!

Haha! laughing me knackers off!

 

[Testermans]

Smart or Stupid??

Either way you got to love the ambition haha

 

[Sparky2blues]

Nice pictures Grant. I've seen the golf tees used in connector blocks before but not seen the other attempts anywhere

 

[SJD]

I started out to uncover the wiring behind plasterboard for a bank of four FCUs on the right connected to an RFC, that had to be removed. Then I discovered a separate circuit just above them, that disappears into the wall.



Puzzled by the two cables crossing under the two above circuits, I removed more plasterboard and uncovered a buried box to the left of the socket (this is a third circuit).

 

[Andy78]

Nicked from facebook.... but pretty funny

 

[hightower]

Was at a meeting at ramside hall today. Not quite sure on the safety of this

 

[jimmy mustard]

 

[shanky887614]

a tab has been welded onto the end of that so it will work

if you change the screws lol

 

[davesparks]

a tab has been welded onto the end of that so it will work

if you change the screws lol

How will it work by changing the screws? Opening the door just slides the plate off the end of the bolt!

 

[ruston]

just need a hole drilled though the bolt and locked with a padlock lol.

 

[davesparks]

Or pull the bolt out completely and stick a long padlock through the hols left

 

[NDG Elecs]

This was the (speaker/bell) cable supplying a small class 1 chandelier with 7 x G9 40W lamps in. Not got to the other end of the cable yet as going to have to lift boards upstairs, but expecting some melting. Customer said it stopped working a little while ago, and 230V no longer present. Cct isolated but customer also a bit miffed that I said to use only table lamps til I can get back!

 

[shanky887614]

How will it work by changing the screws? Opening the door just slides the plate off the end of the bolt!

put your glasses on and look again

 

[jimmy mustard]

Not a actual job pic but still work related that i find quite funny (and true)

 

[HandySparks]

a tab has been welded onto the end of that so it will work...

What tab? We're clearly not seeing the same thing.

 

[rsgaz]

It's not a tab welded on, it's the other screw behind it...

 

[andyb]

Although not great it would probably work.
Assuming the door is hinged then the bolt looks like it would stop the door swinging open, the bolt is straight but the bracket through which it passes will not be moving in a straight line and would hit the bolt.

 

[Phil Thompson]

"My cooker stopped working, can you call round and have a look?"
Lol

 

[ruston]

View attachment 31472
"My cooker stopped working, can you call round and have a look?"
Lol

Did you find the problem? It may help others.:wink5: