Induction hob with x 2 single ovens best wiring layout tips

[sidekick]

If i run 6mm to oven switch to supply induction hob via ccu. Any tips on the best way to wire the two single ovens in.

 

[trev]

Wattage?

 

[Engineer54]

Depends on the KW ratings of these 3 appliances, and whether or not your intending to run 2 supplies or one based on those KW ratings. Unfortunately were not mind readers... lol!! :rolleyes2:

 

[trev]

Depends on the KW ratings of these 3 appliances, and whether or not your intending to run 2 supplies or one based on those KW ratings. Unfortunately were not mind readers... lol!! :rolleyes2:

You're not??? Dammit that's the whole job screwed then

 

[Engineer54]

You're not??? Dammit that's the whole job screwed then

But i'm dammed good at reading face and body language though!!! lol!! :smart: :blush5:

 

[drew35]

Are the single ovens 3kw jobbies with three pin plug thingies on them???

There are some special oven and hob connectors around now, I fitted a cooker connection unit t'other day which had two separate outlets. My local supplier had it so it was probably CLICK.

 

[colshaws]

Are the single ovens 3kw jobbies with three pin plug thingies on them???

There are some special oven and hob connectors around now, I fitted a cooker connection unit t'other day which had two separate outlets. My local supplier had it so it was probably CLICK.

Like this Click 45a Easyfit Dual Appliance Cooker Outlet Plate

 

[sidekick]

Thanks all. Not got the model details with kw etc yet. But can calc cable sizes etc no prob. Was just wanting to know the preferred layout. i.e seperate cable and oven switch for hob and two ovens on seperate fused connections or plug tops or both on dual ccu fused from oven switch

 

[Rauer]

I would have one supply for the hob and one supply for the ovens

 

[sedgy34]

Your the sidekick not us lol

Need loadings of hobs really