j s i
-
- Reaction score
- 3
Hi all,
I need to install a new consumer unit where the power circuit is using steel conduit as the cpc.
The conduit is bushed and terminated correctly at the socket back boxes and into the Mantel unit for the fuseboard.
Zs readings are all good at socket outlets.
There are no earth fly leads from the back boxes to the socket outlets, but 1 screw lug in each back box is fixed and 1 screw lug is adjustable.
As I haven't installed/altered the ring final circuits is it ok to connect the new consumer unit to existing circuits.
Thanks in advance.
I need to install a new consumer unit where the power circuit is using steel conduit as the cpc.
The conduit is bushed and terminated correctly at the socket back boxes and into the Mantel unit for the fuseboard.
Zs readings are all good at socket outlets.
There are no earth fly leads from the back boxes to the socket outlets, but 1 screw lug in each back box is fixed and 1 screw lug is adjustable.
As I haven't installed/altered the ring final circuits is it ok to connect the new consumer unit to existing circuits.
Thanks in advance.