- Thread starter sparky24
- Start date
Discuss Spd and certification in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Share this page
- Reaction score
- 1,509
The circuit schedule should match the layout of the board so I would say yes and only till in the required bits, although there is an SPD section at the top of the circuit schedule
- Reaction score
- 25,419
I don't unless it is connected through a protective device.
Reply to Spd and certification in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net
Share this page
Similar Threads
Hi guys, could someone help with the following please? The scenario is:
Domestic property supplied via three phase (with a 3P main DB, NO SPD)...
Just a quickie the new amendment certs now have tick boxes for the SPD… would you still add it to the schedule list for the DB… ie: At the top of...
Has anyone fitted an SPD to a schneider standalone AFDD DB.
Isobar P B Standalone Active distribution board, Acti9, 24 AFDD ways
This board only...
Hi fellow sparks,
I've just started out on my own so I'm spending a lot of my time trying to find out the correct way of doing things of...
NICEIC Certification Scheme
SPD on old consumer unit?
Under amendment 2 of the BS7671, there is now a requirement to fit an SPD as standard.
I am due to install a new outdoor socket circuit on an...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.