Teeside HNC Electrical and Electronic Engineering

[lewbo]

Any one any good info on the maths bridging and how long expected to take?

 

[chispas]

Yes Sparkymalarky.
Which modules you have with e-learning/distance learning???

 

[sparkymalarky]

HNC there are 8 modules withe option of expanding for a HND. Currently studying Engineering Science at the minute working on an assignment on DC circuits.

 

[chispas]

Sparkymalarky these are some of mine for:
REFERENCES---DC motors and generators
Gussow, Milton, Schaum’s Outline Series, Basic Electricity, McGraw-Hill.
Academic Program for Nuclear Power Plant Personnel, Volume IV, Columbia, MD:
General Physics Corporation, Library of Congress Card #A 326517, 1982.
Academic Program for Nuclear Power Plant Personnel, Volume II, Columbia, MD:
General Physics Corporation, Library of Congress Card #A 326517, 1982.
Nasar and Unnewehr, Electromechanics and Electric Machines, John Wiley and Sons.
Van Valkenburgh, Nooger, and Neville, Basic Electricity, Vol. 5, Hayden Book Company.
Lister, Eugene C., Electric Circuits and Machines, 5th Edition, McGraw-Hill.
Croft, Carr, Watt, and Summers, American Electricians Handbook, 10th Edition, McGraw-
Hill.
Mileaf, Harry, Electricity One - Seven, Revised 2nd Edition, Hayden Book Company.
Buban and Schmitt, Understanding Electricity and Electronics, 3rd Edition, McGraw-Hill.
Kidwell, Walter, Electrical Instruments and Measurements, McGraw-Hill.

 

[sparkymalarky]

Information overload.

 

[chispas]

Electrical and Electronic Principles and Technology, 4th Edition
I am using this book for science and you can download it for free.

:banghead:


:sweatdrop:

 

[sm75k]

Electrical circuit theory and technology by John Bird
Engineering mathematics through applications by Kuldeep Singh

Both really good books for the HNC!

 

[ssk13]

I did bridging module. 4TMA's. some of it quite heavy. Luckily had guys at work who had recently completed HNC/HND. Depending on your level 1-3months

 

[Justadaftspark]

I have a wee Question. In ENS- TMA2 Q2c is the tension in the rope at rest or falling?
ie T=mg or T= mg-ma

Im not sure if the acceleration of the mass in taken into account

 

[sm75k]

Hi mate, i used T=m(a-g) to give a -ve figure against gravity. I still haven't submitted this TMA yet so i dont know if it's right, sparkymalarky may know.

 

[Justadaftspark]

Thanks for that, i still need to do a bit more investagation.

 

[sm75k]

Has anyone had the chat with the module mentor yet, i've still got 2 tma's to go but was just wondering how it goes?

 

[Justadaftspark]

Ive been in touch by email when a TMA that i submitted didnt get marked. I got his email address of the website. I assume that its through email that you would arrange a phone consultation

 

[LiveWire007]

Thankfully I have finished the first two TMA's and I have now just started TMA3 but unfortunately Q2('pot' slider position) has me stumped. Can anyone throw me a light on this one?? I can only assume this needs to be solved as a quadratic equation. Thanks chaps

 

[sm75k]

sorry mate haven't got there yet.

 

[sparkymalarky]

Thankfully I have finished the first two TMA's and I have now just started TMA3 but unfortunately Q2('pot' slider position) has me stumped. Can anyone throw me a light on this one?? I can only assume this needs to be solved as a quadratic equation. Thanks chaps

Mate, stumped on this one as well, I have the whole TMA3 finished bar this question, you got any ideas yet?

 

[LiveWire007]

Hi mate, yep I've sorted this one now. PM me if you still need a hand.

 

[sparkymalarky]

and so I did!

 

[LiveWire007]

Sent you PM mate

 

[sparkymalarky]

YASSS!! TMA 3 in the bag with a wee distinction! Happy enough with that one! Been working on TMA 4 now as past 4-5 days! Anyone this far yet? Cannot wait to get engineering science through with!