Currently reading:
Useful Information for Electrical Form filling to BS7671

Discuss Useful Information for Electrical Form filling to BS7671 in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

Thank you, top man . I am an electrical engineer from china, now there is a big project which have been undertaken by our company in oman, so i want to learn more electrical knowledge by this forum ,now i am very happy ,i have found it
 
So you're looking at a Domestic Electrical Installation Certificate? And in test results section with a heading 'Circuit Impedance's'

Ring final circuit continuity Continuity low ohmic reading (0.18)(0.18)(0.31)
(R1 + R2) or R2 low ohmic reading (0.14)
Zs low ohmic reading (0.37)
Insulation Resistance High ohmic reading obviously greater than 1M ohm as BS7617 but an off the scale reading for a new installation..
Each installation will differ, obviously, I hope this is what you are after...
 
Thanks,actually this is new install,commercial property,all ckt are radial,i have never seen that kind of box on test sheets,little confused
 

Reply to Useful Information for Electrical Form filling to BS7671 in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top